Question about Cars & Trucks

Open Question

How to replace rocker rail digidoor II - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had a valve job done on my 91 nissan pathfinder vg30e engine. I'm now putting the rockers and rails in. What steps do I take to insure the proper timing


If you don't have any rockers installed yet turning the crankshaft by hand will not open any valves, so no damage will happen. Line up the timing marks on the cam gears then put the belt on. After that, you can put the rockers in.

Aug 28, 2017 | Nissan Cars & Trucks

1 Answer

My digidoor 1000n motor recently did not close all the way leaving a gap of about 60 mm and yesterday the gap seemed a bit bigger more like 100 mm how do i set it to close fully


on the rail there should be 2 cylindrical black magnetic read switches with white wires connected to them.
Those are the open and close distance units
sometimes they come loose and move with the vibration of the motor when opening the door

Nov 30, 2016 | Cars & Trucks

1 Answer

Where can I get a digidoor 1 garage door motor ?


I found a site that you may check out go google -type in www.hydrodoors.co.za/products
they claim to be the home of digidoors. they have an e-mail , sales@digidoor.co.za and a telephone no. 0114749060
even if they are not close to you maybe you can purchase on line and have it sent to you.

Feb 17, 2015 | Cars & Trucks

1 Answer

2001 izuzu tropper 3000 wont start... Injectors replaced, 12V ok on the injectors, Can it be anything related with the oil pressure on the rail (injectors)?


oil viscosity is very important, and yes if the rail oil pressure sensor is not reading correctly at least 3 to 5 Mpa while cranking the injectors will not be turned on by the engine ecu. if you can get a scan tool look at rail oil pressure sensor reading just after cranking it should drop to 0 to 0.5 Mpa if any different its no good, also check for oil leaking out of main injector harness connector near engine oil dip stick if oil leaking out of connector this pressure switch which is in oil rail under rocker cover is no good and injector harness needs replacing this is very common.

Oct 02, 2013 | 1999 Isuzu Trooper

1 Answer

Number one injector came loose in 2001 toyota avensis d4d, removed injector pipes, wiring on injectors and rocker cover, tightened down injector, rebuilt and is now down on power.


REPLACE THE FUEL INJECTOR CANT REBUILT IT.IF YOU REMOVE FUEL INJECTORS FUEL RAIL YOU HAVE TO REPLACE GROMMETS AND O RINGS ON ALL THE FUEL INJECTORS IF NOT YOU WILL HAVE A INTAKE LEAK AT THE OLD FUEL INJECTORS SEALS.REPLACE THE FUEL INJECTOR YOU REBUILT THEY HAVE TO BE REPLACED.

Mar 02, 2011 | Toyota Camry Cars & Trucks

1 Answer

Oil leaks into sparkplug well


theres this seal that go on the rocker arms rail
you need to remove the rocker arm rail
if your very good mechanicly try it

May 08, 2010 | 1995 Honda Accord

1 Answer

No Start


check this link it may just point you in the right direction.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801cd705

Dec 13, 2008 | 1989 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...