Question about Cars & Trucks
2004 NISSAN QUEST 3.5 SERVICE ENGINE SOON CODES P-1760 AND P1800 AND DELETE IT WITH SCANNER AND SERVICE ENGINE SOON LIGHT GO OFF BUT STILL HAVING STORED P1760 NO SERVICE ENGINE SOON LIGHT OFF AND WHEN ENGINE IS RUNNING SOME VIBRATION FEELING ON ENGINE OR TRANNY , I DO NOT KNOW FROM WHERE ,MAYBE BETWEEN ENGINE AND TRANNY,MAYBE THE CONVERTER? AND LATER P1800 AGAIN WITH P1760 ... SOMEBODY CAN HELP ME
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It NEVER was the camshaft sensor! Unless, you've removed the engine lately, which I doubt.
RUN to Advance Auto Parts and buy a can of "SeaFoam" and add to your gas tank per instructions...drive at least 100 miles and the problem should go away...IF it doesn't you'll have to replace the O2 sensors in the exhaust system...Any good mechanic should be able to do this for much less $$ than the dealership DO NOT go to the dealer for repairs!
Posted on Jun 22, 2009
SOURCE: Nissan Quest/Knock Sensor
n ot enough info to determine....... now what speed sensor.. one is the vehicle spped sensor to operate the speedodometer.. the other is for the engine speed for timming of motor..
Posted on Sep 04, 2009
This is most likely the O2 Sensor however, that light may also come on for a vacum leak or anyone of a number of other sensors. Take the vehicle to Auto Zone and ask them to use a code reader on it and tell you what the code is for. If the code is for O2 sensor as I suspect the part will cost about $40 and take maybe 20 minutes to replace your self. ($40 for part + 5 to 10 for the special socket) If it shows anything else you may want to take it to a mechanic to have the vehicle diagnosed.
Posted on Oct 08, 2009
The oil change wouldn't cause this problem. Just in-case, check the engine oil level.
There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.
Posted on Oct 11, 2009
Testimonial: "very helpful. i have the mechanic checked the car , the sensor says it has a malfunction in P0340"
Tips for a great answer:
Jun 27, 2016 | Nissan Cars & Trucks
Mar 14, 2016 | 1996 Nissan Quest
Sep 12, 2012 | 2001 Nissan Quest
Jun 25, 2012 | 2005 Nissan Quest
Sep 09, 2011 | 2005 Nissan Quest
Jul 14, 2011 | 2002 Nissan Quest
When the Check Engine/Service Engine Soon light (Varies by make) is turned on the computer control unit (called the ECM) has sensed a fault in the electronic controls of the engine and/or the emission system. When this happens you will seldom feel the car engine run any different. You will need to get the systems Electronic control module tested for the faults codes it stores when the check engine light is turned on. This requires the use of a tool called a scanner, it is specific to your car make.
Apr 17, 2011 | 1994 Nissan Quest
Oct 11, 2009 | 2004 Nissan Quest
Apr 23, 2009 | 2005 Nissan Quest
411 people viewed this question
Usually answered in minutes!