Question about 2004 Ford Freestar

Open Question

Where is the baro sensor in ford freestar - 2004 Ford Freestar

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oxygen sensor 05 freestar


You need to find out which oxygen sensor needs to be replaced, your vehicle could have 2 or 3. They are located in the exhaust system either in the exhaust manifold or the exhaust pipe before the catylitic converter and one after the catalytic converter. http://www.rockauto.com/en/catalog/ford,2005,freestar,3.9l+v6,1430707,exhaust+&+emission,oxygen+(o2)+sensor,5132 Where is the o2 sensor on 2005 ford freestar 3 9

Feb 15, 2017 | 2005 Ford Freestar Wagon

1 Answer

My ford ikon fyjb duratec 1,6 16v engine has these 2 fault codes p0113 and p0107.car starts and rough idles then dies down.what needs to be done and what are these codes?


code p 0107 refers to manifold absolute (MAP) pressure sensor/barometric pressure(BARO) sensor---low input===causes ---wiring short to ground---MAP sensor---BARO sensor---ECM
code p 0113 refers to intake temp temperature(IAT) sensor---circuit malfunction====causes ---wiring open circuit/short to positive---wiring short to ground---ground wire defective --IAT sensor---ECM
take it to an accredited service centre that has experience on your make of car and have it diagnosed

Jan 20, 2017 | Ford Cars & Trucks

1 Answer

Need the code PO722 for a 2006 ford freestar 3.9


Hope, code PO722 Output Speed Sensor No Signal.
Possible trigger for code,
  • Defective Output Speed Sensor
  • Defective Shift Solenoids
  • Defective Engine Coolant Temperature Sensor
  • Defective Valve Body
  • Dirty transmission fluid that restricts the hydraulic passages
  • Defective Output Speed Sensor wiring or connector
P0722 Ford Output Speed Sensor No Signal
http://www.autozone.com/repairguides/Ford-Freestar-Monterey-2004-2006/Diagnostic-Trouble-Codes/4-2L-V6-VIN-2-Auto-5/_/P-0996b43f802e829c

Aug 27, 2016 | 2006 Ford Freestar

1 Answer

Mapping codes P0107, P2263 & P2227 come up on scan tool what are these codes relating too? Ford Ranger 2008 not 2004 3.0 4 door


code p 0107 refers to manifold absolute pressure (MAP) sensor /barometric pressure (BARO) sensor --low input ====causes --wiring short to ground ---MAP sensor ---BARO sensor ---ECM
code p 2263 refers to turbo charger (TC) boost pressure /supercharger (SC) boost pressure ---performance problem====causes --mechanical fault
code p 2227 refers to BARO sensor -range / performance problem===causes wiring --- BARO sensor --- ECM
I would be testing the BARO sensor for a problem as it is listed for all 3 codes
if you don't have such a sensor you have a MAP sensor which is reading in the same area so test that as well

Oct 19, 2015 | 2004 Ford Ranger

1 Answer

Ford freestar


Suddenly the fans stayed on and the weather does not work, it's hot or cold

My freestar 2006 , help me please .
thanks

josue

Sep 24, 2013 | 2004 Ford Freestar

1 Answer

P0171 what could be problem


p0107 refers to manifold absolute pressure(MAP) sensor barometric pressure (BARO) sensor--low input.--- causes-- wiring short to ground---map sensor baro sensor ECM. use only genuine units in replacement

May 18, 2013 | 1998 Ford Windstar

Not finding what you are looking for?
2004 Ford Freestar Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...