Question about 2000 Chrysler Concorde

Open Question

How many foot pounds of torque are required for the lower intake manifold bolts of a 2000 3.2 chrysler engine

How many foot pounds of torque are required for the lower intake manifold of a 2000 chrysler concorde 3.2 liter?

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
moparownr
  • 667 Answers

SOURCE: torque specs needed

do you have a Haynes reapir manual or Chiltons? if not you can get one from autozone or some other parts places, or you might find one in your local library, inside that book are all the torque specs you can stand.

Posted on Mar 23, 2009

Ad
  • 226 Answers

SOURCE: how much torque is needed for the bolts on the

Intake manifold & fuel injector 200 in lbs, plenum 250 in lbs. Hope this helps, Rick

Posted on Apr 29, 2009

SOURCE: WHAT ARE THE TORQUE SPECS FOR THE INTAKE MANIFOLD

Sorry first attempt got sent by accident

Upper intake manifold bolts/nuts 168 in-lbs

Lower intake manifold nuts are done in 4 steps

Step1. Front nuts 61 in-lbs
Step2. Rear nuts 185 in-lbs
Step3. Front nuts 185 in-lbs
Step4. Repeat Steps 2 and 3

Posted on Feb 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The torque specs when replacing the inake gaskets on a 97 Lumina 3.1 liter enne


The torque specification is a 2-step process; tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in). Tighten the vertical lower intake manifold bolts (the four middle ones) to 13 Nm (115 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 25 Nm (18 lb ft).

Upper Intake Manifold
Tighten Bolt/stud 25 Nm (18 ft. lbs)
Notice inch pounds and foot pounds. 62 inch pounds is 5.2 foot pounds.

Jan 05, 2017 | Cars & Trucks

1 Answer

03 Dodge Intrepid intake manifold torque specs top & bottom is for 3.5 V6


Lower Intake:
  1. Use a skin coat of RTV silicone on both sides of the water passage ports (outer most holes) and put the new lower intake gaskets into place
  2. Hand tighten the 13mm head intake bolts and Torque the bolts , starting from the center and working your way out in a circular pattern
  3. Torque these bolts in a few small increments until they have reached 250 inch pounds of torque.
  4. Upper Intake Plenum:
  5. When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be torqued to 250 inch pounds .The fuel rail bolts should be torqued to 100 inch pounds

Jun 24, 2016 | 2003 Dodge Intrepid

1 Answer

What is the lower intake manifold torque specifications on a 2005toyota solara with a 3.3 engine


Most lower intake bolts are torqued at around 43 foot pounds. Foreign and domestic. But to be honest. I been doing this for so long, the only thing I torque to specs are rod and crank bears, and head bolts. The rest is just feel. If you need the exact numbers. You'll have to buy the manual.

Dec 05, 2014 | 2005 Toyota 4Runner Sport

2 Answers

How much torque should be applied to a chrysler 300 2006 3.5L and torque for the intake manifold?


Data I have found indicates that a torque of 250 inch pounds is appropriate for these 13mm bolts. Torque them in a circular pattern starting from the center pulling through several times. DO NOT OVERTIGHTEN!

Nov 26, 2014 | 2006 Chrysler 300

1 Answer

Cyl head torque specs focus 1.6 LX 07


cylinder head and main bearing bolts had a first step torque of 50 to 60 foot-pounds and a second step torque of 80 to 90 foot-pounds each. The rod bearing bolts had a first step torque of 25 to 30 foot-pounds and a second step torque of 30 to 36 foot-pounds. The intake manifold and exhaust had a first step torque of 5 to 7 foot-pounds. The intake manifold had a second step torque of 14 to 21 foot-pounds while the exhaust manifold had a second step torque of 16 to 23 foot-pounds.

BMW PARTS

May 25, 2012 | Ford Focus Cars & Trucks

2 Answers

2001 daewoo lanos dual overhead 1.6 liter head bolt torque and sequence


  1. Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using angular torque gauge .
2001-daewoo-lanos-dual-overhead-1-6-vrq3bch1e30nz1jlq5sn5nnt-4-0.gif

Oct 20, 2011 | 2000 Daewoo Lanos

1 Answer

I need to now what to torue the bolts to on the intake manifold for 1998 Ford F150 4.6


The lower intake bolt get torqued in two steps..Following the correct pattern, first to 18 inch pounds and second pass to 6-8 foot pounds.

chuckster57_55.gif

Sep 22, 2011 | Ford F-150 Cars & Trucks

2 Answers

I need lower manifold rocker and upper manifold torque instructions please help


Head Bolts
Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation.New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.
The Intake Bolt Torque 10 Foot pounds (Final torque)
Note:to torque bolts & nuts, start in center using crisscross pattern working outward

Dec 05, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Need the torque specs for the upper intake bults on a 2002 chrysler sebring conv. 2.7L


4022caa.jpg

Fig. Intake manifold bolt torque sequence 2.7L engine

Upper intake manifold with a new gasket on the lower intake manifold and torque the bolts, in sequence, to: 105 inch lbs. (12 Nm)

Hope helps (remember to rate this answer). Good job.

Oct 11, 2010 | 2002 Chrysler Sebring

2 Answers

What are the torque measurements for the rocker arms and intake manafold?


2.2L Engine & 2.4L Engines
These engines are not equipped with rocker arms. The camshafts directly actuate the valves.

3.1L Engine & 3.4L Engines
When install or connect the check the following:
- Pushrods and the rocker arms. Torque the bolts to 24 ft. lbs. (32 Nm). - Rocker arm cover using a new gasket. Torque the rocker cover bolts to 89 inch lbs. (10 Nm).
- Heater bypass pipe. Torque the screw at the water pump to 106 inch lbs. (12 Nm), the bolt at the cylinder head corner to 18 ft. lbs. (25 Nm) and the nut to 18 ft. lbs. (25 Nm).


About the INTAKE MANIFOLD...
-
Intake manifold nuts and bolts and tighten to 89 inch lbs. (10 Nm)
- Pushrods and rocker arms. Torque the bolts to 89 inch lbs. (10 Nm) plus an additional 30 degree turn. - Lower intake manifold. Apply sealant to the threads of the bolts and torque the bolts to 115 inch lbs. (13 Nm).



859cdc3.jpg

Exploded view of the upper and lower intake-3.1L & 3.4L engines


fe92b8b.jpg

Fig. Lower intake manifold tightening sequence-3.1L & 3.4L engines

Hope help.

May 04, 2010 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
2000 Chrysler Concorde Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...