Question about Cars & Trucks

Open Question

Location of the blend door actuator on a 2004 pontiac aztek

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jturcotte
  • 8172 Answers

SOURCE: location of blend door or

The temperature door actuator is located at the bottom of the heater housing at the center terminal. It looks like this:

6b48b5c.gif
To remove the actuator

  1. Remove the left and right underpanel silencer ducts.
  2. Remove the two retaining screws from the actuator which are accessible from the right side of the center stack.
  3. Remove the screw from the actuator on the left side.
  4. Pull the actuator straight down from the shaft and disconnect the electrical wire. Upon removal, matchmark the shaft position of the actuator, because the shaft on this motor is keyed.

Posted on Oct 03, 2010

warlock61
  • 659 Answers

SOURCE: need to locate blend door actuator 98 lincoln

it is located on top of the heater box assy behind the dash just to the left of of the glovebox if you open the glovebox and look to the left you can see it

Posted on Jul 11, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

  • 701 Answers

SOURCE: where is the fuel filter located on a 2004 pontiac aztek

Hello rg1947lockha: My name is Roger and I will help. You will find the fuel filter located on the left side of the vehicle. It will be just a head of the left rear tire. Should you need further help please just ask. Please rate the answer you received. This way I know it was helpful. Thank You for using Fix Ya. Roger

Posted on Dec 14, 2009

Testimonial: "FOUND THE FUEL FILTER IT IS LOCATED ON THE DRIVERS SIDE ON THE INSIDE OF THE FRAME RAIL JUST AHEAD OF THE DRIVERS SEAT THANKS FOR YOUR HELP"

  • 248 Answers

SOURCE: What do I have to remove to access blend door actuator

very lenghty process. too long to describe here....go to Bonneville Forums read the text and follow linked there at the bottom....very good and detailed....I'm doing that right now,,,,it is a bugger,

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of passenger side blend door actuator on 2006 mercury mountaineer auto controls, 6 cylinder


Temperature Blend Door Actuator - RH, EATC Removal and Installation
  1. Remove the RH floor console finish panel.
  1. Lower the glove compartment.
  1. Disconnect the RH temperature blend door actuator electrical connector.
  2. Remove the 3 RH temperature blend door actuator screws.
    1. Remove the RH temperature blend door actuator.
2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as mountaineer

Jun 19, 2017 | Mercury Cars & Trucks

2 Answers

How do I find the ac heat acuator on a 2001 Pontiac Bonneville sle.


How To Install Replace AC Heater Temperature Actuator ...

? 4:40
https://www.youtube.com/watch?v=mVP09M7hLB4
Jul 21, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/temperature-blend-door-actuator/i/1ahcx00293 ... How To Remove Install Door Chevy Monte Carlo Pontiac Grand Prix ...

GM Blend Door Actuator Repair (Saturn, Chevy, GMC, Buick ...

? 4:28
https://www.youtube.com/watch?v=fER3ZqnYLZg
Jul 11, 2014 - Uploaded by willmacneill
The procedure is the same for most GM blend door actuatorsfrom 1990-2013 (found in many vehicles made by Chevy, GMC, Buick, Pontiac, ...

Mode/Temperature Door Actuators May Fail : Pontiac ...




Jan 16, 2016 | Pontiac Cars & Trucks

1 Answer

Air blend door actuator


This could be a computer problem or a defective blend door actuator .most common is the blend door actuator . Now if the actuator is not giving the proper feedback to say what position is it in then if could be defective . im not saying to buy from this website ok ....it simply to show you the part picture . you should be able to get it at auto zone or advanced auto locally
http://www.partsgeek.com/ss/?i=1&ssq=air+flap&x=0&y=0

Nov 05, 2013 | 2004 Pontiac Grand Prix

1 Answer

I need to replace the Heater Blend Door Actuator in my wife's 2004 Pontiac Grand Am SE. Were is it and how hard is it to replace.


its hard job if first time doing mechanic work.problem could be the temperature control switch also.to get to the air door actutor you have to remove instrument panel cluster and remove lower right sound insulator and lower left sound insulator panel and knee bolster from below the steering column.first you need to disable airbag in the steering wheel and passenger side dash before working around the dash area.to disable airbags turn off radio disconnect negative battery cable wait 20 minutes let airbag discharge first before attempting to work around the dash or instrument cluster. like i said hard job if first time you have remove a lot of things to get to the heater core housing where air door actutor and defrost actutator locations.

Feb 02, 2013 | 2004 Pontiac Grand Am

1 Answer

Where is the blend door actuator located on 07 g6


Did you resolve your issue? I have the same problem, believe the blend door is jammed on my 2006 Pontiac G6. Please help!

Jan 26, 2013 | 2007 Pontiac G6

1 Answer

No air out of vents


Usually a sign the blend door under the dash is stuck or the motor that controls it has failed.
If you look up "blend door motor" on the auto parts stores websites you can get a picture of it.

Aug 08, 2012 | 2001 Pontiac Aztek

1 Answer

Blend door actuator possibly bad how hard is it to fix or replace?


usually it is in the dash and the glove box needs to be removed to get to the actuator.

Jul 18, 2012 | 2004 Kia Sedona

1 Answer

My 2004 Avalanche ' heating system will not heat. No matter what the setting it either blows no air or cold air and it is 25 degrees outside so this is a problem. The engine is up to temp and I have tried...


The most likely cause is a failed blend door actuator; however I recommend a little troubleshooting. First, can you hear a clicking sound behind the dash when you turn the setting to hot? If yes, it is certainly the actuator stripping its gears. If not, check to make sure the heater hoses are both hot as they connect to the heater core at the firewall (in the engine compartment). If one or both of the hoses do not get hot, there is a blockage caused either by an air bubble or a stuck water control valve in the heater hose. If the hoses are both hot, the indication is again the blend door actuator.

Below are instructions for replacing the actuator. Look at the diagrams carefully--the big arrows point to the front of the truck and the actuator is on the side of the heater box above the outlet duct that runs to the driver's side of the floor. Also, the actuator is expensive, so I recommend you make sure it's bad and shop around a bit to get a good price. To check out the actuator, first see if you can turn the blend door by hand. If you can't turn it, maybe it's jammed. Also, reconnect the actuator after removing it and see what it does when you turn the heater to hot.

Removal & Installation
  1. Remove the floor air outlet duct extension (1) from the floor duct (2).

    jturcotte_393.gif

Fig. Remove the floor air outlet duct extension (1) from the floor duct (2)


Disconnect the electrical connection at the blend door actuator (#10 in pic below). jturcotte_394.gif

Fig. Blend door actuator and related components


Remove the blend door actuator mounting screws from the HVAC module.


Remove the blend door actuator as an assembly with the actuator cam.
jturcotte_396.gif

Fig. Remove the blend door actuator mounting screws from the HVAC module



To install:

  1. Install the blend door actuator as an assembly with the actuator cam.
    1. Line up the heater/defroster valve lever with the blend door actuator cam slot.
    2. Line up the A/C valve lever with the blend door actuator cam

  2. Install the blend door actuator mounting screw to the HVAC module.
    1. Tighten the blend door actuator mounting screw to 14 inch lbs. (1.6 Nm).

  3. Connect the electrical connection at the blend door actuator (10).
  4. Install the floor air outlet duct extension (1) to the floor air duct (2).


Picture of actuator:


jturcotte_57.jpg

Dec 07, 2010 | 2004 Chevrolet Avalanche

2 Answers

2004 f350 ford heater blows cool air but hoses are both warm-where do i start looking


check to see if the blend door is moving where you change the temperature setting. I think your blend door is behind the glove box. Here are instructions for removing the actuator. Take it off, plug it back in and see if the motor rotates. Also check to see if you can rotate the blend door by hand. If you can rotate it by hand, the motor is probably broken of the gears are stripped. Let me know if you have questions.
  1. Release the stops and lower the glove compartment door.
  2. Disconnect the connector.
f4b0b74.gif Fig. Blend door actuator-F-250 & 350


  1. Remove the two screws. Rotate the blend door actuator and bracket assembly. Remove the electronic blend door actuator and bracket assembly.
  2. To install, reverse the removal procedure.

Oct 17, 2010 | 2004 Ford F350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...