Question about 2003 Jaguar X-Type

1 Answer

My 2003 S-Type is misfiring when it reaches 3000 rpms. it read codes p1111, p0333,p0332,p1316,p0305,p0303,p0301,p0300.

Posted by on

  • macucho10
    macucho10 Jan 15, 2013

    It drives smooths even at high speeds, but when it reaches 3000 rpms it starts acting up.

  • Tom Jan 02, 2014

    Replace the large green "O" rings under both the round black intake runner control actuators in the intake. They leak sometimes and cause rough idle or issues like you describe. Check for cracks in or under intake tube.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jaguar Master
  • 22,095 Answers

Think you have a problem with the computer but what i have no idea to be honest ,its going into limp mode as these vehicles have a limit to the RPM you can achive on static standing .These vehicles can only be revved to 3000 rpm when stationary as this i do know from when i take this type to the test station and the sound test states 3500rpm but only 3000 can be obtained ?good job iam well known at the test station .So i would suggest that consult the dealer with the view of doing a mapping of the computer to see what the problem could be.So firstly what i would try is to disconnect the battery in the boot and join the leads together and leave overnight to discharge the memory in the computer and see if this cures the fault .

Posted on Jan 17, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 279 Answers

SOURCE: 2003 x-type codes help. P0037,

Go to http://www.bluejag.co.uk/diagnosticcodes.php to get a good description of the problems. Looks like a fault on cylinder 5 to me Ignoring P1111 which dosn't matter at the moment, could be ignition coil, plug, injector etc unless there is anything else obvious in that area. (when were your plugs last changed?)

Posted on Aug 16, 2011

creg_912
  • 196 Answers

SOURCE: 2003 x-type codes help. P0037,

DTC P0037; RIGHT-HAND CATALYST MONITOR SENSOR HEATER CONTROL CIRCUIT LOW/HIGH RESISTANCE
DTC P0300; RANDOM MISFIRE DETECTED, MISFIRE DETECTED, PRIMARY CIRCUIT MALFUNCTION
DTC P0305; RANDOM MISFIRE DETECTED, MISFIRE DETECTED,
P1316 IS A MISFIRED OF A CATALYST FOR EX.SPARK PLUG,INJECTOR PRESSURE ,IN GENERAL ITS THE MISFIRED DRIVE CYCLE ...SOMETHING IS FIRING PROPERLY..LET ME ASK HOW MANY MILES DO YOU HAVE.?AND CODE P1111 IS NOTHING TO BE WORRIED ABOUT ITS THE SYSTEM READINESS TEST THAT THE CARS ECM PERFORMS WHEN YOU CUT IT OFF EACH TIME...MAKES SURE THAT ALL IS FUNCTING WELL.

Posted on Aug 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 jeep liberty 3.7 code po300, po302 what does this mean


These numbers are OBD codes. They are misfire coding.
There is a youtube video to assist with troubleshooting.
Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

Good luck.
Semper Fi,
Z

Jun 04, 2017 | Jeep Cars & Trucks

1 Answer

2003 jeep liberty po302


Answered in another location. This is a misfire code for #2.
Here is a video to assist in trouble shooting.
Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...
Semper Fi,
Z

Jun 04, 2017 | Jeep Cars & Trucks

2 Answers

Missfire cyl 1 An 4


Replace the coil pack.

May 28, 2015 | 2005 Chevrolet Aveo

1 Answer

Lexus engine check code P0305


All of these codes are misfire codes.clicking sound is most likely spark jump from plug wires to metal(head,block,valve cover etc.)

Sep 10, 2012 | 2002 Lexus ES 300

1 Answer

2003 x-type codes help. P0037, P0300, P0305, P1111 (pend), P1316. Any help with explaining these codes will be much appreciated. Thanks


Go to http://www.bluejag.co.uk/diagnosticcodes.php to get a good description of the problems. Looks like a fault on cylinder 5 to me Ignoring P1111 which dosn't matter at the moment, could be ignition coil, plug, injector etc unless there is anything else obvious in that area. (when were your plugs last changed?)

Aug 11, 2011 | 2003 Jaguar X-Type

1 Answer

2003 x-type codes help. P0037, P0300, P0305, P1111 (pend), P1316. Any help with explaining these codes will be much appreciated. Thanks.


DTC P0037; RIGHT-HAND CATALYST MONITOR SENSOR HEATER CONTROL CIRCUIT LOW/HIGH RESISTANCE
DTC P0300; RANDOM MISFIRE DETECTED, MISFIRE DETECTED, PRIMARY CIRCUIT MALFUNCTION
DTC P0305; RANDOM MISFIRE DETECTED, MISFIRE DETECTED,
P1316 IS A MISFIRED OF A CATALYST FOR EX.SPARK PLUG,INJECTOR PRESSURE ,IN GENERAL ITS THE MISFIRED DRIVE CYCLE ...SOMETHING IS FIRING PROPERLY..LET ME ASK HOW MANY MILES DO YOU HAVE.?AND CODE P1111 IS NOTHING TO BE WORRIED ABOUT ITS THE SYSTEM READINESS TEST THAT THE CARS ECM PERFORMS WHEN YOU CUT IT OFF EACH TIME...MAKES SURE THAT ALL IS FUNCTING WELL.

Aug 11, 2011 | 2002 Jaguar X-Type

1 Answer

Code p1313 p1316 p1111 p0301 means what?


Odd one this to have P1111 as well.

According to my data P1111 is all dtc checks compleated, http://www.bluejag.co.uk however some websites show it as a Intake Air Temperature (IAT) Sensor Circuit Intermittent High Voltage, I'm fairly sure that the latter is incorrect.

check the basics first plugs, leads, corroded ground connections etc then its a bit of a guessing game


As for the other codes

P0301 = Misfire detected - cylinder 1
P1313 = Misfire rate catalyst damage - bank 1
P1316 = Misfire excess emission


Possible causes (as per JTIS):

Cylinder compression low
Worn camshaft / broken valve spring(s)
Fuel delivery pressure (low / high)
Fuel injector(s) restricted / leaking
Fuel injector(s) continuously open
Fuel contamination
Fuel injector circuit fault(s)
(Injector DTCs also flagged)
Spark plug failure / fouled / incorrect gap
ECM to ignition coil primary circuit fault
(Cylinder misfire detected DTC also
flagged)
Ignition coil failure

hope this helps

Mar 13, 2011 | 2002 Jaguar X-Type

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

2 Answers

Obd codes p0300 p0301 p0303 p0305 p0401


P0401 Exhaust Gas Recirculation Insufficient Flow Detected

P0300 Random/Multiple Cylinder Misfire Detected
P0301 Cylinder 1 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected


I would check out the EGR valve. That maybe what is causing all the misfires.

Mar 24, 2009 | 1997 Toyota Camry

Not finding what you are looking for?
2003 Jaguar X-Type Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...