Question about 2004 Rover 25 1.4

1 Answer

Dashboard rover 25 removal - 2004 Rover 25 1.4

Posted by on

  • doncasterdav
    doncasterdav Jan 17, 2013

    sorry aboutthe lack of detail on the original post. I have a rover 25 and the heater control know has snapped near the base of the spindle. ive looked but cant find the part includong spindle anywhere. the only solution I have been given is to buy and fit the entire centre console. is the really the only solution to a broken knob.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Rover Master
  • 22,326 Answers

Parts are available for this car from the old rover agent but for this part iam not sure ,its not difficult to change the centre consol though from what i remember ,phone just rang and its sales people again i get about 5 calls a night from this to everything so turned phone to fax .let them talk to the fax machine ? Lot of screws behind the trim if i remember rightly so dont force nothing but its been a while since i had the one on my car off for something ? think it was the airbag module or whatever long time ago ,sold it to the scrapyard in the end lovely car diesel with AC but someone stole the paperwork and it wasnt registered in my name ,the owner had gone back to the UK so i couldnt do anything with it .Pity as i liked that car

Posted on Jan 17, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fitting near side driving mirror on 2001 rover 25

There is a triangular shaped piece of plastic in the corner of the door nearest the hinge's remove that and you should see the screws for the mirror and you may need to remove the door card.

Oct 17, 2016 | Rover Cars & Trucks

1 Answer

How do I disconnect the alarm on a rover 25

now some rovers will disconnect the alarm with a fuse under the bonnet in the box the top right one if i remember correctly but this was a earlier model that i had a 200 .Now on the rover what happens is if you leave the key in and the door open the alarm locks on ,this is easy enough to turn off if you have the remote but if you do not have a remote?? .Earlier ones you could also bridge a transistor in the computer and this by-passed the alarm but the later ones iam not so sure about ,on a car this age their should be plenty in the scrappers so find one with the keys and remote and remove the whole lot ,computer/key/transponder and change it all over .Or see if the original dealer who will no doubt have another make of vehicle franchise but still have the software to programme it all up for you and supply some new remotes for toy and programme them in .

Jan 19, 2015 | 2004 Rover 25 1.4

1 Answer

How do i replace the heatr core in my 2000 model land rover

Put bluntly, this is a swine of a job. The entire lower dashboard must be removed, but FIRST, block off the water hoses from the engine bay and/or drain the system. Replacing the core itself is not that hard - if you get a new one you will see where the bolts and hoses go but you have to get to it. Frankly, unless you have a fair bit of experience working on these vehicles, you will be better off (if not financially) going to a specialist Land Rover shop (not a dealer)

Sep 18, 2014 | Land Rover Cars & Trucks

1 Answer

How to remove engine from rover 25

If you are seriously asking this question i would suggest you take the car to a Garage or someone who has some experience and equipment.

Jul 20, 2014 | Rover 25 Cars & Trucks

1 Answer

Rover 25 fault finding

It can air core gauge. It will always show what's in the tank

May 15, 2014 | 2004 Rover 25 2.0

1 Answer

How to remove radio/gps unit on 2003 range rover hse

In theory quite a simple job but in practice you are unlikely to complete the task without a little damage to the interior, particularly the fabric on the inside of the A pillars.

First remove the air vents from the dashboard end caps. If you peer through the vanes on the vents you will see four plastic lugs (two per side) that have to be bent inwards. Once all four are clear then the vent just slides out towards you.

Next remove the plastic panels from the end caps in the door jambs. With these and the vents out of the way you will be able to remove the screws holding the end caps on. Some are accessed from the side and some from the front through the vent aperture. Once all the screws have been removed (four per side if I remember correctly) the end caps will slide off towards you.

Finally you have to remove the dashboard top. This requires that you remove all the exposed hex screws from the top plus two smaller screws that were hidden under the dashboard end caps yo have removed. Once all the screws have been removed slide the dashboard top towards you (it moves about an inch) and then you can lift it off vertically. If it doesn't move there may be an additional fastening under central speaker grill.

With the top off you will be able to release the radio/gps unit and remove it.

Reassembly is simply the reverse process but for some reason more difficult! Have a look on U tube as there used to be some videos showing how to do it. They make it seem much easier than it is! Good luck.

Apr 08, 2014 | 2003 Land Rover Range Rover

1 Answer

Rover 25 turns over but will not start

auto shutoff relay bad or ignition module bad/malfuntion..check for codes..

Dec 18, 2013 | Rover 25 Cars & Trucks

1 Answer

How to replace offside drive shaft on 2001 rover 25

Mark drive-shaft and yoke to re-install in same location to maintain factory balance
Loosen and remove small "U" clamps at yoke end of drive-shaft
Pry drive-shaft out of yoke, pull off of splined end.

Oct 18, 2011 | 2001 Land Rover Range Rover

2 Answers

Rover 25

From memory every 60000 miles or 5 years.


Jul 04, 2008 | 1997 Land Rover Defender 90

Not finding what you are looking for?
2004 Rover 25 1.4 Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rover Experts


Level 3 Expert

78936 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14406 Answers


Level 2 Expert

64 Answers

Are you a Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides