Question about Cars & Trucks

1 Answer

Where can I purchase the small pastic piece that links the left side interior driver's door handle to the cable for a 1997 XJ6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

Other than going to a towyard, a dealer is the best option some dealers may have to back order it but it depends on where you are located city or country

Posted on Jan 15, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: Hyundai accent 1997, the driver side door handle broke

taking off the door panel is a lot of work. i can explain it all to you if you still have the same problem. i've replaced all of my door handles for all 4 of my hyundai's doors, so i'm experienced in this department. would you like a step by step walkthrough still?

Posted on Aug 05, 2009

greezy_je208
  • 237 Answers

SOURCE: installing driver side interior door handle

pull the inner panel off by first un screwing the two screws located on the handle portion of the panel(they may have plastic hadeaway covers over the heads) then remove the window rolldown handle(if so equipped,manual window)then pull the plastic trangle from the inner of the mirror(this little tri angle keeps the trim down and secure on the door. then pull the palnel directly out there are small clasp pins in behind the panel try not to break these(but they do sell replacements at your local auto store) you will have to get ALL of these free then wiggle the panel up releasing it from the inner shell of the door and and window. you should now have a clean view of the handle. you will now need to droll out the rivit holding the handle to the inner steel of the door. pull the handle forward and it should be released from the inner steel now there clips holding the "rods" to the handles back side, they should have a little piece clipped to the rodto un clip these you need only push them off with your thumb. then replace handle with the new one, and uce a large steel screw to secure the handle when replacing back on door.

Posted on Dec 12, 2009

  • 1 Answer

SOURCE: Interior Door Handle

This was a three minute repair, once I had the replacement handle. Leave the door panel alone! Remove the single screw holding the old handle in place. Use a flat blade screwdriver to jimmy the old handle away from the door about an inch. There are two plastic clips holding it to the rods, one for the locking mechanism and one for the latch. Use the flat blade screwdriver to unclip these two connectors. Remove the broken latch, and don't worry, the rods won't disappear into the door! Reverse these steps with the new handle (insert rods, attach clips, wiggle assembly into place, and fasten with single screw). You're done!

Posted on Dec 20, 2009

  • 1 Answer

SOURCE: The interior door handle on the driver's side of

remove the screws that fasten the interior door panel to the door.  Visually inspect the handle assembly. there will be two cables that connect the handle and lock button to the door lock assembly.  I would bet that the L-shaped end of the interior door handle cable broke.  The replacement is self explanatory for the handle. Google the door lock assembly which isn't as visable.  Bob

Posted on Mar 07, 2010

  • 5 Answers

SOURCE: 2006 Ford Fusion. Left front door inside handle

This link is from the handle to the latch. The door panel has to be removed in order for this problem to be fixed. The linkage is inside the door panel, it is a small diamater metal rod called a link. If you do the job yourself be careful not to break the door panel. In a shop, the labor is 1 hour for the job & if any, parts will be a seperate charge.

Posted on May 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side interior door handle doesn't open the door


the arms have fallen on the lock latch inside the door. you have pull off door panel to fix it12_5_2012_11_02_23_pm.png

Dec 05, 2012 | 2006 Buick Rendezvous

1 Answer

97 Mercury Mountaineer driver side door won't open. Outside handle flops around; inside handle won't open door


Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck, remove the seat first. Find the screws and bolts around the door handle and arm rest. Most Ford's have screws around the outer side of the panel. I don't believe your's does. The panel lifts or pops off. Once the panel is off, you can reach down and open the door. Just a note. I have done some to where the panel came out in pieces.

Mar 14, 2012 | 1997 Mercury Mountaineer

1 Answer

I need a diagram of the locking mechanism in my 2001 nissan sentra so that i can use a slim jim to unlock the passenger side door.


I don't have a diagram of the door but if you slip the slim Jim in over the top of the outside door handle it should catch on the latch bar. If you are doing this because the door won't open from the interior handle or the outside handle the problem most likely isn't the lock. The way that handle connects to the release it is held in place with a piece of plastic that breaks fairly easy. If that piece breaks the interior door handle won't activate the unlock function when pulled and you will have a heck of a time getting the door opened so you can get inside the panel to do the repair.

Oct 05, 2011 | 2001 Nissan Sentra

2 Answers

2001 Toyota Sequoia lift gate latch broken, door is locked closed


Take a look at my other Sequoia posts about this.

You need to remove the interior pull handle first then gently pry away the interior panels from the top down. Go look at Tundra Solutions.com for the detailed procedure on the handle assemlby replacement but here is a rundown:

First, take off the license plate2_bing.gif.
Since the hatch wouldn't open, I started from the inside and took down the top trim piece. After that the two side pieces come down, then the main trim piece which covers the bulk of the door comes out. These are all popped in with the white tabs.
There are 3 access hole covers to pop out (don't forget to install them back in when done) and through the left hole you can see the mechanism to unlatch, press it down with a screwdriver and open the door. If anytime you close the door you will have to do this to unlatch, up until you disconnect the cable and pull out the handle, then you have to locate the cable and pull that directly.
Behind the large trim piece you will find a metal access cover, remove the 7 or 8 10mm bolts holding that on and pop the 3 white tabs and let it hang off to the side. Disconnect the cable from the handle assembly by reaching in from the right hand side and popping of the cable from the handle assembly.
From the left and right access holes, locate the two 10mm nuts which hold the license plate assembly to the door and remove them. Then there are 4 plastic tabs that come in from the outside that hold the license plate assembly on in each corner, try and locate those and using some pliers squeeze them together and push it through. Next locate the license plate lamps wire connector and release that from the left side, it’s the simple push in and pull out square white connector.
After these are out, put back in 1 or 2 bolts into the large metal access cover so the hatch can be lowered (don’t close it).
Here is where I had fun, begin to pop out the assembly that it was bolted to. I ended up breaking 3 of the 4 plastic tabs in each corner because I did not use pliers from the other side to pull them out, however it remained somewhat useable (hindsight 20/20).
Now the license plate assembly can be taken to a bench to replace the handle assembly (Toyota doesn't sell just the handle, it is a small assembly). Two screws out and the assembly is replaced.
Before pressing the license plate assembly back onto the truck, make certain all the plastic tabs are in the assembly and not in the truck. Reverse the process to re-install.

Sep 07, 2009 | 2001 Toyota Sequoia

2 Answers

How do i remove interior door panel & trim


Answer There is a small black plastic piece that surrounds your door handle. You MUST take that off, I find a small flat tip screw driver works best. The plastic cover that goes on the inside part of the door where your mirror is should be removed, makes it a lot easier to remove door trim: No screws on that part just grab from both sides and pull. 3 screws on bottom and 1 screw inside the armrest. The window crank, easiest way tried and true, shoestring, pull handle towards inside of car until you have enough room to fit the shoestring between crank and plastic washer. Give it a pull back and forth and it'll pop right off; clip should stick to shoestring as an added bonus.

Jun 01, 2009 | 1999 Daewoo Lanos

1 Answer

Need directions to remove driver door interior panel 1997 deville


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Apr 21, 2009 | 1997 Cadillac DeVille

1 Answer

Are there lights in the interior door handles when 96 XJ6


No There are not any lights in the interior door handles of the '96 XJ6

Apr 20, 2009 | 1995 Jaguar XJ6

1 Answer

How do you install a driver side mirror?


hey, I replaced a mirror on a 2002 civic lx coupe.

1) Pry off the small pastic traingular piece from the interior of your door.
2) Disconnect the wiring to the mirror
3) There will be 3 bolts that attach the mirror to the car, remove these and the mirror can be removed. To put on the new mirror just do everything in reverse

Just make sure you order the right mirror, I accidentally order the mirror for the sedan model the first time and they are not interchangable.

Hope this helps

Jul 31, 2008 | 2001 Honda Civic

1 Answer

Driver side door


a small white plastic connector has broken at handle (outside) I discovered this tonight, removal of the handle does allow one to access the lift rod from the outside of the car via the hole left. The electric, and manual lock still works, and it will not open if locked! Good way to have fast access until replacement part can be found, I will update when that happens,

Jul 09, 2008 | 1997 Volvo V90

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...