Where is the combination flasher on 2002 dodge intrepid

old marine

• 2426 Answers
• Posted on Feb 05, 2009

SOURCE: dodge intrepid 2002

The knock sensor is threaded into the block of the engine, just below where the cylinder head sits. You will need to remove the intake plenum (upper and lower) to access this part.

Dale Farr

• 78 Answers
• Posted on Mar 17, 2009

SOURCE: I need a time diagram of an 2002 dodge intrepid,

Hi there;

Here is a picture of the timing marks for the 2002 2.7L intrepid engine.


Hope this helps
Farrout!

SOURCE: finding flasher on 95 dodge intrepid

The flasher relay should be located in the fuse panel on the left end of dasboard which is visible with driver door open and there you will see a panel to remove to gain access.

SOURCE: Serpentine/drive belt routing diagram of a 2002 dodge Intrepid needed.

Try this web sight. http://www.dodgeintrepidchat.net/02lhe/

SOURCE: the turn signals/flashers and hazard lights on my

check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace