Question about Ford F-450
Code 301 is a miss on cylinder one.
Code 316 is for a miss on startup which would be connected to code 301.
Code 1000 means the computer self-test did not finish.
Code 1565 is specific to Ford products and means the cruise control system failed to engage - command switch is out of range.
Someone will need to check cylinder one to find the main problem. Code 301 means the cylinder is not producing power but not why. It could be ignition, fuel, or mechanical.
Posted on Jan 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like your window assembly has failed or the cable has broken. An easy repair, once the door panel is removed and the assembly disconnected from door.
Posted on Nov 01, 2008
it is down under the intake manifold. the intake manifold must be removed to get to it. this vehicle is known for developing a vacum leak in the elbow hose that connects to pcv valve, so ive done a few.
Posted on Feb 19, 2009
First- to drain ,you can reach the drain valve,from the pass side,if you lay on the ground and reach up to the radiator. You do not even have to raise the vehicle up
Second- mix Yellow GO5 Coolant about 50/50 or 60/40. Do not use Green in a Ford or Orange GM
To Fill- Remove the front two plastic screw type buttons,from the engine cover
-Remove the cover
The radiator cap is on the front of engine,on top,it is plastic
Remove cap and that is your fill point
Run engine to warm and get thermostat open,as you would with any vehicle
Top off coolant,replace cap
VERY IMPORTANT-next to the Power Brake Booster,and just under it,is a BLEEDER HOSE;to let air out of system. Turn screw slot ,only a little,DO NOT REMOVE SCREW. When coolant runs out close.
Fill-Degas Bottle,to full line,with coolant.
Check the next couple days on resevoir level ( Degas Bottle)
Posted on May 06, 2010
Tips for a great answer:
Jun 11, 2017 | Lincoln Cars & Trucks
Aug 24, 2014 | 2001 Lincoln LS V8
Apr 12, 2011 | 2002 Lincoln LS
Feb 10, 2011 | 2003 Lincoln LS
Jan 17, 2011 | 2002 Mercury Sable
Aug 11, 2010 | 2004 Lincoln LS
Apr 23, 2010 | 2003 Lincoln LS
Apr 06, 2009 | 2002 Lincoln LS
261 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: