Question about 2003 Dodge Dakota Club Cab
Truck wont stay running without keeping your foot on accelerator
Powertrain Control Module
There is an idle speed motor on the side of the throttle body, I would thouroughly clean throttle body.
Posted on Jan 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if the battery voltage gets low the computer will lose its memory...the idle air control is not ure what to do.. drive the vehicle for a while ...you may have to 2 foot it but eventually it should idle
Posted on Oct 09, 2008
This is a fuel pump issue. i would replace it and the lines as well.also, a minor tune up wouldn't hurt as well. wires plugs distributor cap points etc...
Posted on Feb 11, 2009
when the battery goes dead it looses its memory on engine settings like idle speed.. two things you can do first one is to clean the throttle bore with carb cleaner... the other is to start with foot on gas and slowly bring it back to idle... it will pick up the idle air position to keep itself running if you do it slowly... everything happens over time so as the throttle gets dirty the computer makes these adjustment on its own and when the battery dies it starts out basicly at different percentage of idle control tht it really needs because of the carbon buildup on the throttle plates
Posted on Feb 19, 2009
Tips for a great answer:
Feb 14, 2016 | 1986 Nissan Pickup 4WD 1986
Nov 25, 2015 | 2000 Nissan Maxima
Jan 05, 2014 | 1997 Chevrolet Lumina
Oct 04, 2012 | Cars & Trucks
May 17, 2012 | 1988 Honda Accord 4 Door
Aug 26, 2014 | 2003 Dodge Dakota Club Cab
181 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: