Question about Mitsubishi Galant

Open Question

Iat sensor location 2003 carisma diesel? - Galant Mitsubishi Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: i cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC

Try “autozone.com” or your local library for diagrams and step by step instructions.

Posted on Mar 12, 2009

JShreader
  • 50 Answers

SOURCE: locating the iat sensor on a chevy tahoe 2008

Yes. That is exactly it. The Air Intake Temp Sensor is built into the Mass Air Flow Sensor on the Air Filter Box. Below is a picture...
29f8daa.jpg
6d7178d.jpg
I personally have not connected one of these Chips to a Tahoe...What I can provide you with, is the Connector Diagram so you know exactly what Wires you need to Splice in to. See below...
ce630fe.jpg
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JShreader.

Posted on Mar 31, 2009

  • 66 Answers

SOURCE: I am looking for the I.A.T. Sensor location on my truck

If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.

Posted on May 27, 2009

  • 11 Answers

SOURCE: 1997 nissan pathfider iat sensor

i believe it is built together with the mass airflow sensor!

Posted on Jul 22, 2009

  • 18 Answers

SOURCE: wire colors for my IAT sensor

red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Posted on Dec 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which 2 wires are the IAT sensor on 2003 Chevy Silverado 2500HD


Your IAT sensor should be located in the intake snorkle between the air box and the throttle body.

Jun 13, 2015 | 2003 Chevrolet Silverado 2500HD

1 Answer

Iat location for PARTHFINDER 2003


Intake air temp sensor is usually in the air filter box or the hose from there to throttle body.

Jan 26, 2015 | 2003 Nissan Pathfinder

1 Answer

Where is the IAT Sensor Located at on 1987 ford f350 with a 6.9 diesel engine


The Inlet Air Temperature sensor (IAT) located in an air passage in the intake manifold measures the incoming air temperature.
Cold air is denser, contains more oxygen, and therefore requires a richer mixture.

REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring to the IAT.
  3. Remove the sensor from the intake manifold (MFI engines) or air cleaner/tube (SFI engines).
To install:
  1. Clean the sensor area. Install the sensor into the intake manifold and tighten to 12-15 ft. lbs. (16-24 Nm) on MFI engines. Fasten the twist-lock part on SFI engines.
  2. Attach the wiring to the unit.
  3. Connect the negative battery cable.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 07, 2012 | Cars & Trucks

1 Answer

Where is the iat sensor located on a 2003 kia sorento


Intake Air Temperature (IAT) Sensor: this sensor is located in the air intake plenum assembly. This sensor is combined with the MAF sensor.

Hope helps (remember to rating this free answer).

Oct 07, 2011 | 2003 Kia Sorento

2 Answers

I need to find the intake air temperture sensor in my dodge


depends on the engine...
3.7 liter, #1 below:

jturcotte_112.jpg

4.7 liter:

jturcotte_113.jpg

5.7 liter, #2 below:

jturcotte_114.jpg

Jan 01, 2011 | 2006 Dodge Ram 1500

1 Answer

Engine starts and runs for a minute or so starts to sputter then shuts off. will restart, sputtering and shuts after a few minutes. code shows iat sensor, where is it located on the 2003 ford taurus


IAT sensor is the Intake Air Sensor.. It could be temperature or amount and as the engine is stalling, I would suspect that the sensor is not measuring the amount of airflow correctly..Substitute a known good unit as these sensors are not a repairable item..

Aug 12, 2010 | 2003 Ford Taurus

1 Answer

IAT sensor on 2001 chevy silvrado 2500hd 6.0 L need location


The iat looks like the mass air flow its a hard plastic cylinder that connects to the intake tube after the air cleaner

Sep 20, 2009 | 2003 Ford Ranger Regular Cab

1 Answer

Locating the iat sensor on a 2003 dodge 5.9


The IAT sensor is along the intake tube before the throttle body. If your planing to buy the performance chip from EBAY or any other place, save your money. You can go to Radio shack and it will cost you less then $3.00 for the resistor needed to make your own "performance Chip" IF you like you can use and 10K ohm potentiometer wire it through to the IAT sensor wire harness so you can adjust your timing for the type of fuel you want to use or how much performance you want out of your engine. Here is a link to the installation of the resistors and the different resistor's you can use or like me use a Potentiometer. Note if the timing is to high on hot days, the knock sensor may trigger and the engine will power down 15% till next start up. Good luck and hope this helps. http://kingenterprises.net/IAT-Timing-Tricker.htm

Jun 15, 2009 | 2008 Suzuki SX4

1 Answer

I am looking for the I.A.T. Sensor location on my truck


If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.

Apr 05, 2009 | 2004 Dodge Ram 3500 Truck

1 Answer

I NEED TO KNOW WHERE MY IAT SENSOR IS LOCATED


i need to know where is the iat sensor located on my 2003 cl3.2

Jul 24, 2008 | 2003 Acura 3.2CL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...