Question about 2003 Toyota Corolla
This is usually because the spring the pops it open is broken, have someone pry on the fuel door while ppulling the release inside, the spring clips onto the hinge if it's broken get a replacement from the toyota dealer
Posted on Jan 15, 2013
One way screwdriver be carful other way is find cable before it broke and cut cable and pull wire inside cable.
Posted on Jan 20, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now.
Posted on Aug 12, 2008
Hi, you need to take the locks to a locksmith to have the keys made, they may have to be diferent than the original ones. good luck.
Posted on Aug 20, 2008
The ground circuit for the driver side door switch is compromised, or the door switch is bad. Try this: Remove the black rubber cover from the door swich. Using a 10 millimeter wrench or socket, loosen & tighten the switch retention bolt. See if the dome light flickers. If so, the ground on the switch is bad, & just needs cleaned up. If not, remove the switch, and touch the wire behind the switch to the body,or the bolt hole. If the dome light lights, you need a door switch. Your problem is entirely in the door switch/ground/wiring. Hope this helps, and thanks for choosing FixYa.
Posted on Oct 28, 2008
There is a problem with the door switch the door is not pushing the switch in completely. Here is what you do close all the doors, then you open them one at a time with all the other still closed. start with the drivers door. open and look for the pin with that the door touches when you close its on the bottom close to the back of the driver's seat it has a black rubber covering it. Press with your thumb in and see if light goes out. Check all other doors in the same way you will see which door switch is not being pressed in completely when door closes. If you find it a quick fix is to pad the area on the door that makes contact with the switch to push it in, for example you can use one of those round sticky cushions that you use on the metal chair legs to prevent them from scratching your wood floor. However if you can solve the problem in this way you may have to take it to electrical mechanic or I will be able to provide more help. contact me and leave me a feedback. Good LUCK
Posted on Dec 12, 2008
Tips for a great answer:
May 15, 2013 | 2006 Toyota Corolla
Feb 01, 2013 | 2008 Toyota Corolla
Aug 27, 2012 | 1989 Toyota Corolla Sedan
Jul 09, 2012 | 1996 Toyota Camry
Sep 09, 2011 | 1996 Toyota Corolla
Aug 25, 2011 | 1988 Toyota Corolla 4 Door
Dec 29, 2009 | 1996 Toyota Corolla
Oct 13, 2009 | 1996 Toyota Corolla
May 16, 2009 | 1998 Toyota Corolla
Mar 18, 2015 | 2003 Toyota Corolla
298 people viewed this question
Usually answered in minutes!