Question about Isuzu Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Holden 94 rodeo petrol
Vale clearance cold
intake .006 in (.15 mm)
exhaust .010 in (.25 mm)
1. With transmission in Neutral or park, start engine and warm to normal operating temp. turn eng,and all accessories off. connect Tachometer. Connect timing light to no 1 spark plug wire.
2. Disconnect and plug fuel vapor canister purge hose and EGR vacuum hose. Start and ensure idle is 900 RPM. adjust idle as required. Check ignition timing ( 12 @ 900)
3. If adjustment is required, loosen distributor hold down bolt and turn until timing is within specification. Tighten distributor hold down bolt and recheck timing. adjust idle speed as required.
hope this helps
Posted on Sep 30, 2008
SOURCE: Valve tappet adjustment
well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Posted on Feb 07, 2009
There is no valve adjustment for that engine, Hydraulic lifters, You might remove the valve cover and see if you have a rocker arm loose
Posted on Mar 13, 2010
Tips for a great answer:
Jan 28, 2015 | Isuzu Cars & Trucks
Dec 05, 2014 | Isuzu Cars & Trucks
Dec 03, 2014 | Isuzu Cars & Trucks
Jul 06, 2014 | 2008 Isuzu i-Series
May 15, 2014 | Cars & Trucks
May 02, 2010 | 2008 Isuzu i-Series
860 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: