Question about 2003 Ford Mustang

Open Question

No brake lights on a 2003 ford mustang - 2003 Ford Mustang

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 99 Answers

SOURCE: 1997 Ford Mustang won't go out of PARK!! HELP!!

The brake light switch at your pedal is defective, or more likely, the wire at the connector broke or came loose. If you need to move it in an emergency, turn off the car, place it in neutral, and start it. Mind you that you still will not have brake lights. The switch is an easy fix.

Posted on Aug 11, 2008

  • 1 Answer

SOURCE: 1969 ford mustang mach 1 brake / stop light switch challenge

I installed a new turn signal switch in the steering column, and it fixed my brake light problem. Evidentally the turn signal and brake light wires use the same plug wires. It cost about $70. I would suggest doing this.

Posted on Mar 31, 2009

  • 65 Answers

SOURCE: A diagram of a 2003 Ford Mustang interior fuse box?

here you go
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Posted on Jul 07, 2009

Ford Guroo
  • 71 Answers

SOURCE: brake lights stopped working 1998 mustang

Fuse panel is under the dash also as I have found with my own graceful daughter, there is a brake light switch that connects to the brake pedal itself. It is hard to get to and even harder to see but a lot of times these switches get bumped and they can not make connection when the brake pedal is depressed. Hope this helps

Posted on Feb 07, 2010

  • 65 Answers

SOURCE: how to replace brake pads on 1998 ford mustang

break lug nuts loose
jack up car place stand under car
remove lug nuts and wheel
remove brake caliper
take out pad on outside of caliper
place a brake caliper press on pad next to piston of caliper and compress piston back in caliper
remove press and replace pads
reinstall caliper and wheels set car down
REMBER TO GET IN AND PUMP BRAKE PEDAL A COUPLE TIMES OR YOU WILL NOT HAVE ANY BRAKES WHEN YOU MOVE YOUR CAR!!!!!!
check fluid in master cylinder
take your time

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front passenger tire on my 2003 Ford Mustang makes terrible grinding sound when brakes are applied.


Not the tire

The brakes have an issue,you know that

Neglect or sloppy work--- is why

Jul 22, 2014 | 2003 Ford Mustang

1 Answer

Why would the brake lights go out in my 2003 Ford Mustang, when all of the fuses are still good?


It could be a number of things. I would check the brake light switch. Look upward from where you put your foot on the pedal, you will find the switch. Test for voltage on both sides of the switch. There should be power to one side of the switch at all times. When you push the brake pedal down, the power should flow to the other side (wire), of the switch. Basically, if you have power coming in to the switch, and you DON'T have power going out of the switch (with the brake pedal depressed), then it's the switch.

May 30, 2014 | 2003 Ford Mustang

1 Answer

03 mustang dash and tailights are working


if you installed an aftermarket stereo, the tail lights run through the illumination. make sure all wires are hooked hot to hot and ground to ground. if you installed it while battery was hooked up and touched a wire, most likely blew a fuse

Mar 13, 2014 | 2003 Ford Mustang

1 Answer

2003 Ford Mustang won't shift out of park


Could be the brake switch, or the shift lock solenoid.
Both components would need to be tested. And you may be able to shift out of park if you try before you turn the key switch to the on position.

May 07, 2013 | 2003 Ford Mustang

1 Answer

2003 mustage will not start in park it will start in nutral / the break lights are not working


nutral park swich out of adustment or defective
brake light swith/ fuse/bulbs/wires to lights

Apr 02, 2011 | 2003 Ford Mustang

1 Answer

Hi, I have power to back up lights, turn signals and tail lights, but no brake lights, what should I check? Joe


first try a new bulb on one side of the brake light at the rear if still not working then i suspect it will be the brake light switch assuming your fuses are all good.

Nov 13, 2010 | 2003 Ford Mustang

1 Answer

My ABS light is turned on, on my dashboard. I have 2003 Mustang with V6 engine. Thanks!


Check/replace brakes if needed But, if you had those brakes replace recently, take the car back to the shop that did it and tell them what's wrong and that you demand they fix it. But, before you do al of that, check your brake fluid level.
If your brake fluid is full then you my need to bleed your brakes or replace ABS sensors on your disk brakes which isn't easy or cheap

Sep 27, 2010 | 2004 Ford Mustang

1 Answer

Where do I adjust the e brake sensor on my 2003 Mustang GT Convertable? The e brake light blinks on and off while changing gears. Also what tool do I use to make the adjustment?


There are two places to adjust the e brake. The most important one is under the drivers side chassis and the other is on the console e brake lever at the base. You may need a very deep socket to adjust the one on the console. thanks, Dana

Feb 28, 2010 | 2003 Ford Mustang

1 Answer

Mustang 2003 park shift stuck brake lights out how to replace fuse?


there is a switch located at the top of the brake pedal bracket that maybe bad.Check it for power on both sldes of the connector with a test light. Also try move it up and down to see if your brake lights come on. If not check fuses.

Feb 08, 2010 | 2003 Ford Mustang

Not finding what you are looking for?
2003 Ford Mustang Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...