Question about 2005 Nissan Murano

Open Question

How to remove the grill on a murano 2012 - 2005 Nissan Murano

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Turned my windshield wipers on and they got stuck because of some ice and now they won't work.

What happened is the linkage popped off or broke. This is located under the grill under where the wipers connect. There will be multiple screws to remove this grill and access where the linkage and motor are.

Feb 28, 2015 | 2012 Nissan Murano

1 Answer

How to change engine air filter in 2012 Nissan murano

Look for a black box like plastic cover with a round accordion hose connected to it, two clips released opens the top by lifting. It is above the backside of your battery

Aug 21, 2014 | 2012 Nissan Murano

1 Answer

How to remove grill off an 2011 Murano

its best you take that to the body shop because i think the whole frot bumper have to move,but look for some round clips and use a flat screwdriver to get under and pry them up carefully,start from the top of the grill and follow the clips,but i think when you move the black cover from around the hood lock area you should see what you must do next

May 18, 2014 | 2011 Nissan Murano

1 Answer

How to remove front grill on a 2011 murano nissan

log in
(remove the screws)

May 18, 2014 | 2006 Nissan Murano

1 Answer

How to replace nissan murano 2011 front driver side turn light

Lift hood, remove grill plastic screws on top, jack car left hand side, remove corner screw on end of bumper, undo lower splash shield screws, slide bumper away from car {about 4 inches}, remove,top bolts on headlight and lift out, the is a locating slot that you will need to manipulate it from, assembly is the reversal. good luck.

Oct 20, 2013 | 2007 Nissan Murano SE

2 Answers

How do I change out a 2005 murano grille? THANKS

This is out of my 06 Murano manual, hope that it helps.

1. Apply protection tape around outer circumference of front grille (bumper fascia side).
2. Remove front grille-radiator cover clips and remove front grille-radiator cover.
3. Remove clips on upper side of front grille.
4. Remove clips of air duct and remove air duct. Refer to EM-16, "AIR CLEANER AND AIR DUCT" .
5. Pull out grille pawls, and remove front grille assembly.

Installation is the reverse of removal.

good luck

Feb 26, 2010 | 2005 Nissan Murano

1 Answer

Same problem with grill bubbling what to do 2004 niss murano

I've decided to "black" mine out with a high gloss black. First I'm going to take the grill off & see if I can use airplane paint remover on a small area to remove the coating that is bubbling.

If so, then i'll primer the surface & repaint it as is since it should be smooth after the remover works and I scrape it down and wash it clean.

You could then leave it once the clearcoat is removed, re-coat it with clearcoat, or paint it any color, even to match. Automotive spray paint is available at auto-parts stores for this type of material, just get the right can of spray paint.

If I find the paint remover won't work without hurting the actual grill, I'll use some fine grit sandpaper and prep the surface, then primer it and paint it high gloss black. Color choice is optional of course!

Maybe this will help.

Jan 29, 2010 | 2004 Nissan Murano

Not finding what you are looking for?
2005 Nissan Murano Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77169 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides