Question about 1995 Saab 900

1 Answer

900 SE 1995 2.5 V-6 with no spark.

I have checked the crank sensor, OK. I have checked the Ignition control modular, OK. I have changed the coil pack, OK. I have disconnected the remote starter, tried but no spark. I have put the car in transport mode with the security system, no spark. I have checked for a kill switch, one found, switched to other position, no spark. I have checked all fuses and relays under the dash, no spark. I changed the engine control modular ( brain ) still no spark. Anyone have any ideas on what I might check next?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 43 Answers

Start with some more basic checks? plugs, ignition wires, ignition sensors (spray em with contact cleaner) also a little more information on Exactly whats happening would be nice, for all we know its your battery, (i.e sounds, sound are important) heck shoot up the starter with a can of starter fluid....or take it to a dealership, ( I do'nt personaly work on Saabs ) they sometimes will tell you a few basic things to try and will get right to it

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NO FIRE TO THE SPARK PLUGS, I CHANGED THE MODULAR,COILS ,PLUG WIRES ,PLUGS , 1997 CHEVY LUMINA 3.1 WHAT NEXT ?


Check for the presence of voltage to the coils and the ignition control module. The ignition switch may not be supplying power in the crank position.

Jun 20, 2015 | Cars & Trucks

1 Answer

No spark on 2002 sentra se-r replaced crankshaft sensor and camshaft sensor.


heres a list, ignition components damp or damaged, worn or faulty spark plugs, broken...loose....or disconnectedwiring in starting circuit, loose distributor changing ignition timing, ignition coil loose...faulty or disconnected wires. its good your cam & crank sensors were changed, but no spark indicates coil packs not able to get spark to plugs, but spark plugs may be fouled, replace them. replace distributor cap & rotor. check fuses, there's one for the ignition switch, check it. try all this see how it does,, also, if you haven't replaced both the AIR & FUEL FILTERS , DO SO !!!!!!!! just for thought, my daughter has a sentra gxe,2002, it started losing power on the highway, we had to have nissan replace it, $900 , you may have to deal with this, sell the car ! when you get it running, if you want. although , after we did repairs, tune-up, timing belt (not chain), etc., it runs like a top, she loves it ! good car if you ask me, just keep filters new, brakes good, it will go forever !

Mar 11, 2013 | 2002 Nissan Sentra

2 Answers

Not getting any spark 1995 pontiac grand prix se 3.1 engine please help


the cheapest and quickest way to check for spark is replace your crank sensor if youve done this and you still have no spark then try a coil pack.

Mar 27, 2010 | 1995 Pontiac Grand Prix

1 Answer

When i drive it jerks and it wasnt starting for a while one day it wouldnt start after i had been driving for a while i poured water on the coil pack and it started


I first would guess a faulty crankshaft position sensor and then ignition coil/ignition module
The problem is with the spark itself. The spark to plugs and wires are controlled by coil pack, which is attached to ignition coil, which then is connected to crank sensor. You can test crank sensor with an ohmmeter to see if it is good. I would also test each coil pack.

Nov 25, 2009 | 1995 Buick Park Avenue

2 Answers

My 1995 buick riviera won't start. no spark fire


corrosion under the coil pack between the computer plates
Heres a video:http://www.youtube.com/watch?v=t_79_btzOF8

Jun 25, 2009 | 1995 Buick Riviera

1 Answer

Have 1999 chevy cavalier and will not start no spark new ing modular crank sensor cam sensor and still will not start


i have a 2002 cavalier that had cam crank ignition control mod and coil packs replaced still didnt start so i started in the steering column it turned out to be the acc switch harness one zip tie around switch and harness problem solved

Feb 20, 2009 | 1999 Chevrolet Cavalier

1 Answer

1995 saab900 se v6


keep working backwards then..coils.. powers/grounds to ignition system

Nov 07, 2008 | 1995 Saab 900

Not finding what you are looking for?
1995 Saab 900 Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

rgbypoet

Level 2 Expert

161 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...