Question about Honda Accord

Open Question

Can't turn off b13 maintenance code on 2010 Honda accord

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 416 Answers

SOURCE: Maintenance required light is on. 1996 Honda Accord

Simple way to check if anything goes wrong is to go to Autozone store (if you are in US) and scan for trouble codes (if there are any of them). They do it free of charge. If you get any codes you can get the explanation of them here
http://www.troublecodes.net/honda/
Good Luck

Posted on Jan 18, 2009

  • 84 Answers

SOURCE: # How to Turn Off the Maintenance Required Light

Use a narrow object(like tip of a pen) and push the 'red' build-in button around the instrument panel and the button will turn back to green and the maintenance required light will go off.

Posted on Jul 07, 2009

  • 16 Answers

SOURCE: how to turn off maintenance minder on 1999 honda

It is fairly easy to do - just hold the odometer mileage reset button before starting the car and turn the key to start the car, keep holding the button for 2 more sec. This works for my 1998 Honda Accord and should be the same for yours.

Posted on Jan 18, 2010

  • 7353 Answers

SOURCE: 1995 honda accord maintenance required fault

most likely your car is long overdue for maint. look in your owners manual for the maint that is required for the mileage on your odometer.

Posted on Jul 02, 2010

Testimonial: "Thank You I do regular maint.but did not know if there was something i was not doing"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key wont turn in ignition


03 steering wheel locked up and key won't turn - Honda Element ...

www.elementownersclub.com > ... > Maintenance and Service

Jun 8, 2010 - 11 posts - ‎6 authors
since Friday, I have not been able to turn my ignition key or unlock the steering wheel. i have already- used graphite lubes and sprays Dash lights won't turn off after exit and door lock - Honda ...
Aug 17, 2010
key won't turn, problem & fix
Sep 8, 2007
More results from www.elementownersclub.com

Honda Ignition Lock Repair - YouTube

? 10:49
https://www.youtube.com/watch?v=T01989YN2Ew
Jan 20, 2013 - Uploaded by Flip Keys
Learn to repair all types of Honda Steering Lock. Either wi... ... I am in NJ and dealing with a key that will sometimes not turn in the ignition cylinder on a 2005 Honda Element. .... (2006 honda accord ) .... It won't turn or come out. ... When you put the rightkey in the slot (and through the key reader part of the ...

Key Won't Turn in Lock - Drive Accord Honda Forums

www.driveaccord.net/forums/4.../219529-key-wont-turn-lock.html

Jan 14, 2016 | 2006 Honda Element

1 Answer

What is a b13 code?


B - Replace engine oil and oil filter.
1 - Rotate tires, and check tire pressure and condition

3 - Replace transmission fluid and transfer fluid (if equipped).

Here is a description of what each individual Maintenance code means for your vehicle.
(Please remember that more than one code may be displayed at a time)
A - Replace just engine oil and Filter
B - Replace engine oil and oil filter. Also inspect Brake system and components and perform a tire rotation.
1 - Rotate tires, and check tire pressure and condition
2 - Replace air cleaner element, check drive belt, and replace dust and pollen filter.
3 - Replace transmission fluid and transfer fluid (if equipped).
4 - Replace spark plugs, replace timing belt (if equipped), inspect water pump, and inspect/ adjust valve clearance.
5 - Replace engine coolant
6 - Replace rear differential fluid (if equipped).

Oct 31, 2015 | 2010 Honda Civic

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

Code b13


It's a maintenance minder code. You could look in the owners manual and decipher the code. You will probably find something like this:

B = Replace engine oil and oil filter; inspect brakes, hoses and lines; check parking brake adjustment; inspect tie rod ends, steering gear box, boots, suspension components, driveshaft boots, all fluid levels and condition of fluids, exhaust system, fuel lines and connections

1 = Rotate tires

3 = Replace transmission fluid (for A/T only)

Mar 10, 2014 | 2003 Honda CR-V

1 Answer

2010 HONDA FIT BASE ORANGE WRENCH LIGHT CAME ON AND OIL IS FINE? WHY IS THE LIGHT ON THEN?


Your mechanic did not reset the maintenance indicator on the last oil change. You just need to reset the maintenance light.

Mar 03, 2013 | 2006 Honda Accord

1 Answer

What is the maintenance inspection for a b13 code


Brother,there's NOTHING that you can't do to your vehicle that they do at the dealership.Get that "Hanes Manual" for that vehicle and go to work.They charge that high price because the CAN.And they get away with it.The manual will tell you what the code coincides with,and that's what you fix/replace.B13 could mean you've a faulty gas cap.Never know.Don't let them take all your money,get dirty and do it yourself.You'll clean up.

Aug 28, 2012 | 2007 Acura MDX

1 Answer

What is B13 service code?


B13 says its time to check your oil levels and change your oil filter and inspect your tire rotation and brakes...Its better to check transmission fluid also along with this.. Its sort of a code for regular maintenance.

Nov 26, 2010 | 2007 Acura RDX

2 Answers

# How to Turn Off the Maintenance Required Light on a Honda Accord (1998, 1999, 2000, 2001) How to Turn Off the Maintenance Required Light on a Honda Accord


Use a narrow object(like tip of a pen) and push the 'red' build-in button around the instrument panel and the button will turn back to green and the maintenance required light will go off.

Jul 07, 2009 | 1997 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...