Question about BMW Cars & Trucks
Take it in for diagnosis then you have the cause of the EML coming on.
Posted on Jan 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Sometimes you can reset the engine warning light by disconnecting the battery for ten minutes or more (be sure you have your stereo unlock code if needed).
That is not a good solution, it is better to diagnose and eventually fix the problem.
Have the car computer scanned with a code reader, the codes you get in return witll tell you exactly where to find the problem.
Here is the code list.
To get the codes the code reader must be connected to the car computer.
sometimes on Bmw you may need a Interface 16 pin Adapter, depending on the code reader.
Here is a home user code reader : PocketScan™ OBD II Code Reader (AXRCP9125 ...
Here is a good scaner.
Always better having the job done at a qualified garage.
Posted on Oct 24, 2008
SOURCE: Eml and diagnostic problems
As for the limp mode unless you have an expensive diagnostic system this usually has to be done by BMW (anything to get ya to a dealership!!). The comms problem, is the key turned in the ignition?
Posted on Apr 27, 2009
Tips for a great answer:
Jun 22, 2016 | BMW Cars & Trucks
Mar 16, 2017 | Cars & Trucks
"EML" is an acronym for "Elektronische
Motorleistungsregelung". Loosely translated from the original German for the BMW
owner means Electrionic Engine Power
"EML" is BMW's system name for electronic throttle management. The "EML" system, in it's most basic sense consists of an accelerator pedal (with an electronic position sensor), a computer module (usu. integrated with the main engine computer), and an EDK (Elektronische Drosselklappe or Electronic throttle valve). The EDK is also known as a "drive by wire" throttle. "EDK" throttles use a computer controlled stepper motor rather than a purely mechanical linkage (usu. metal cable attached directly to the accelerator pedal) to control the opening and closing of the throttle plate.
"Drive by wire" throttles are very common
on modern vehicles starting in the late nineties up through the present day.
"Drive by wire" technology enables very precise throttle control to improve
drivability and vehicle emissions, as well as many convenience features like
electronic cruise control, traction control & stability control.
BMW first implemented "drive by wire" in very limited quantities on the most expensive & sophistocated BMW models starting in 1988.
The latest generation of advanced vehicle
features to take advandage of "drive by wire" technology are radar guided cruise
control, accident avoidance control, autonomous-driving, and autonomous-parking
Read more: http://wiki.answers.com/Q/What_does_eml_warning_light_on_a_bmw_mean#ixzz1OnBNssKH
Jun 09, 2011 | 2003 BMW 325
Mar 12, 2011 | 2008 BMW 528i Sedan
Oct 15, 2009 | 2000 BMW 3 Series
Aug 10, 2009 | 1999 BMW 328 Series
May 19, 2009 | 2002 BMW 3 Series
May 05, 2009 | 1998 BMW 5 Series
558 people viewed this question
Usually answered in minutes!