I have a 93 Geo Storm SOHC 1.6 Manual Trans. I'm looking to pull the factory motor and swap out with a V6.....was curious as to what engine i might purchase to get this going...aka Install easily. I have already heard of two options Caddilac Catera Motor or Chevy Cobalt Motor.....trying to see if anyone had a better idea....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
mitchells DIY (google it....)
log in and read?
and be lots more than only vacuum on that ISUZU Impulse (clone)
vacuum can be different in Canada than USA and in California.
(smog laws dictate all vacuum devices, most)
no country stated, in USA?, then use mitchells.
EGR and evap are diffr.
you would have to have diagrams of each car.
is the motor mounts in the same location, is the the transmission bolt up in the same place, if it rear wheel drive is the drive line same distance, if it front drive car, will all the linkages connect, or in the right location, steering wheel layout the same, is the tires and wheels the same, are the same height off the ground, are both engine same demention, same whight, will the hood close right, the wiring will have to be done too., this list goes on.
storm what engine? 4xe1 or 4xf1 SOHC or DOHC (twin cam)?
its really an Isuzu Impulse in snack skins (badges)
does test fuel run engine? that is step 2.
if the cam timing belt slips, the DOHC goes boom.
the SOHC engine belt slip,cause no starts, due to huge
compression drop, and fails the test fuel tests.
SOHC, keyon, 30-46PSI
same for both. engines
but as all mPI engines it drop running at idle.
and rises at WOT> (FPR actions most work right running) ask
but its no running
ever do a 60,000 interval tuneup with a new cam belt.
There is no way they would leave you stuck with the engine!! However, the odds are that it should fit. First check the flywheel or flex plate. [Not sure if its a auto or manual.] If they bolt on, your are into installing the engine! Good Luck with it! Frankster016