Reset service light on 2010 range rover - Cars & Trucks

SOURCE: How do you reset the service mileage light on a

e mail [email protected] for download

SOURCE: how i reset the service engine light on a 2004

There are hidden cheats (just like a video game)
this is cool try it out.
1. ignition off
2.Press and hold trip meter button(left black button) down and turn igniton kry to first position. Keep the button pressed about 5 seconds until the words Oil Service or Inspection reset appears on LCD display.
3. Release the button then press and hold till reset begins to flash
while the display is flashing let go then press again.
the display will read END SIA and your all done.

In practice you have to make the inputs quickly, do not delay as you will have to start over

SOURCE: 2004 Range rover Check Engine Light

The Range Rover actually has 4 oxygen sensors - 2 in front of the Cat and 2 behind the cat - try to check / replace the other 2

SOURCE: HOW DO YOU RESET SERVICE LIGHT ON A 2006 RANGE

reset service light. The SIA information is stored in the instrument cluster EEPROM and can only be reset by using T4. (Dealer tool)

SOURCE: the service engine soon light

Try this:

Switch ignition OFF

Press and Hold left instrument panel reset button, switch ignition ON to position 1

Keep reset button pressed for approximately 5 seconds until the LCD displays "RESET SIA".

The distance to service and the service type " Inspection" will be displayed.

To reset distance the left hand button should be pressed before the 'RESET' message has

flashed 5 times. The LCD will display 'END SIA'. Switch ignition off

The timing to do this is must be about 5 seconds, if this is not working you can try again.

I have a Range Rover 2005 and it worked for me.