Question about 1996 Chevrolet Blazer

1 Answer

1996 Chevy Blazer wont shift into 3rd just that simple fluid ok ,looked at vacume lines???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Could be your cad coverter does it make any noise when your driving

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed trans fluid in 2002 chevy blazer and now it wont shift into overdrive properly without hesitation


If it had lots of miles on the trans fluid befor you changed it that fluids additives broke down long ago and wore out most of the fiber material in your trans,,its a problem with alot of gm makes ,unfortunatly you now need to rebuild at least a portion of the trans

Jul 21, 2012 | 2002 Chevrolet Blazer

1 Answer

My 1996 chevy blazer has a hard time shifting out of first. It's a the 4x4, it has to reaaly rev about to finally slip into 2nd. It is an automatic. Waht could be causing that?


I don't know about a 1996 modle, but older chevys had a vacume modulator right side of transmission ,above pan some where between frount corner, and middle of transmission.
if the vacume line came of motor would rev extreamly high before a shift,(if it ever did)
my 1988 GMC with 700R4 trans does't use the modulator valve. yours may not either, but it's worth a look.
I hope this is helpfull

Oct 18, 2011 | 1996 Chevrolet Blazer

2 Answers

When hot trany will not work in all gears have just replaced filter gasket


Hello and welcome to FixYa!

If you haven't replaced the transmission fluid recently then now is the time. If the fluid is burnt, the transmission tends to fail specially on hot temp. Please do check the transmission fluid first as a first course of action.

Hope this helps and thank you for using FixYa!

Apr 11, 2011 | 1990 Dodge Caravan

1 Answer

The transmission won't shift out of 3rd and will only go up to 50 mph at around 3500 rpm.


check for a bad vacum to the modulator valve on your transmission,or a bad vacum to the modulator valve on the transmission. the modulator valve to the trans. works off of vacum from the engine,look for loose or disconnected vacum lines around the carb. or the air induction system. look for cracked vacum lines that seem to be sucking air when engine running at idle speed. in park. the modulator valve [usually] located on the drivers side,of the transmission,is the main cause of shifting failure. if the valve itself is bad, it will need replacement. thank you for choosing fixya.com!

Mar 08, 2011 | 1996 Chevrolet Blazer

1 Answer

1975 chevy blazer with a hydro-matic 350 automatic


check your kick down cable attached to the carb, it may be out of adjustment and forcing the trans to stay in "passing gear"

May 28, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

350t chevy tranny hisses when I let of throttle when it's cold. it's in a 1978 chevy blazer with a 350 engine


Check fluid level when hot. If ok the flush cooling lines between tranny and radiator. Also check your modulator they are cheep from napa. Difficult for me to duplicate hissing sound on the computer but check your converter for how hot it is after twenty minutes. Last check the vacume line from manifold to modulator..sometimes a small hole can make that noise and effect shifting...hope this helps:)

Sep 07, 2009 | 1983 GMC C1500

4 Answers

96 chevy blazer 3rd gear and overdrive slipping


i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do

Jun 30, 2009 | 1996 Chevrolet Blazer

1 Answer

1988 Chevy truck


no try looking at the governer on the back should be a cover about 4 in arond remove and look to see if the plastic teeth are broken or worn.

Mar 17, 2009 | 1989 Chevrolet C1500

2 Answers

1996 chevy blazer


you may want to check fuel pressure possibly fuel pump try banging on the gas tank with a mallet while someone tries to start the car if it is a fuel pump you may be able to get it started but pump will still need to be replaced

Oct 16, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...