Question about 2008 Dodge Avenger
How to replace it
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You will need to remove the triangular panel on the inside of the door on the opposite side of the broken mirror. Once you remove the panel, you will see the retaining bolts holding the mirror in place. Once you remove the bolts, the mirror can then be pulled out from the outside. Reverse the procedure to reinstall the new mirror.
Posted on Aug 09, 2008
SOURCE: side mirrors
simple there are 3 nuts 8mm or 10 mm one the backside of those mirrors. sometimes ya just pop off the upper trim on the inside of the door. sometimes you have to remove the whole door panel and that little triangle piece to access the nuts.
Posted on Jan 29, 2009
SOURCE: side view passenger mirror
there will be a small triaglular panel in the furthest side of your door which despite it being hard to come off will clip off. try to take care while pulling this off as the pins can snap quite easily. then you will see the 2/3 bolts connecting the mirror. once you have undone these then unplug electrics which im presuming from age it has, and you will be ready to connect new one.
Posted on Feb 25, 2009
Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .
Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!
Posted on Apr 23, 2009
you should be able to take it off from the inside of the car directly behind were the mirror is. usually ther eis a molding cover ing the mounting screws . take off the molding , mabey a few screw then some body clips that just snap off. now you should unplug the harness if necessary and remove the three or four bolts that hold the mirror on, and that should be it. hope this helps
Posted on May 17, 2009
Tips for a great answer:
Jan 21, 2016 | Cars & Trucks
Nov 30, 2015 | 2012 Dodge Avenger
May 09, 2015 | 2000 Dodge Dakota Quad Cab
Mar 11, 2015 | Dodge Avenger Cars & Trucks
Jul 14, 2014 | 2011 Dodge Avenger
Nov 04, 2012 | 2008 Dodge Avenger
Aug 28, 2009 | 2007 Dodge Grand Caravan SXT Minivan
Apr 28, 2009 | 1997 Dodge Neon
Jan 06, 2009 | 1996 Dodge Ram 1500 Club Cab
381 people viewed this question
Usually answered in minutes!