Question about 1996 Dodge Ram 1500 Club Cab

Open Question

Vaccum line diagram for a 2002 dodge 1500 quad cab 4.7

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: can't open quad cab door on 1998 dodge ram 1500

just finished tonight with the same problem on my 2000 ram, i cut the studs out with a drimel tool, and also the latch, with this out of the way the door opened easily,, have to replace bottom latch later . total time about 1 hour tigerhunting

Posted on Nov 07, 2008

  • 412 Answers

SOURCE: im trying to locate a fcm and pcm...any ideas as

THE FRONT CONTROL MODULE IS LOCATED ON THE END OF THE UNDERHOOD FUSEBLOCK..YOU MUST REMOVE 1 BOLT FROM FUSEBLOCK AND 1 PLASTIC CLIP..SLIDE FUSEBLOCK BACK..FCM IS ATTACHED WITH 4 SCREWS TO FUSEBLOCK..PCM IS LOCATED ON RIGHT SIDE OF FIREWALL OF ENGINE COMPARTMENT..I HOPE THIS HELPS

Posted on Aug 30, 2009

  • 334 Answers

SOURCE: I need a diagram for the serpentine belt on a 2002

get a hane repair manul it should have a diagram in it .you can get one at the auto parts store

Posted on Sep 11, 2009

localwonder
  • 6784 Answers

SOURCE: I need routing guide for serpentine belt for 2002

HI. I have located a good diagram. Kindly follow to assist with the proper routing. Use caution when installing your belt. This is the routing for your engine specs.
3a673c6.jpg




Posted on Feb 01, 2010

autotherapis
  • 501 Answers

SOURCE: 2003 dodge ram 1500 quad cab will not shift out of

There is what is called a shift interlock mechanism. It is suppose to keep you from putting it into gear withut putting your foot on the break.

Do a quick test. See if your brake lights come on when you press the brake peddle. If they do, you will have to go into the wireing of the brake switch and see if power is coming out of the switch to the interlock solenoid. If power is going to the solenoid, then you have a bad solenoid.

Hope this helps.

Posted on Apr 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 2002 Dodge Ram 4x4 have a vacuum modulator?


Does a 2002 Dodge Ram 4x4 have a vacuum modulator ...

www.fixya.com/.../t25860408-2002_dodge_ram_4x4_vacuum_modulat...
14 mins ago - 1 Answer. Where do the vaccum lines go into the transfer case on a 2002 RAM 3500? I need a diagram of the vaccum lines into the transfer ...

Sep 12, 2015 | 2002 Dodge Ram Pickup 1500

2 Answers

Heater only blows out defrost


The defrost position is the default for safety so that air always blows on the windshield in case of frost.
The most common problem is a faulty blend door under the dash.
In most cases the door must be calibrated with a scan tool if you replace it.

Feb 18, 2013 | 2002 Dodge Dakota Club Cab

1 Answer

Need diagram for installation of serpentine belt


Take a picture of it and draw a diagram before you remove the old one. Why does every vehicle owner have this problem?

Feb 06, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

I need routing guide for serpentine belt for 2002 Dodge Ram 1500 Sport Quad cab 4.7 L v-8, Diagram on truck is damaged.


HI. I have located a good diagram. Kindly follow to assist with the proper routing. Use caution when installing your belt. This is the routing for your engine specs.
3a673c6.jpg




Feb 01, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

I need a diagram for the serpentine belt on a 2002 dodge ram 1500 quad cab. There is not one under the hood of the truck.


get a hane repair manul it should have a diagram in it .you can get one at the auto parts store

Sep 11, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

Vacuum lines


look under the hood on the radiator support there should be a belt routing diagram and next to or near that is the vaccum lines diagram

May 10, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Air only blows on floor with very little coming out the defrost or regular vents.


Hope you have the same set up, sure you do. You may have either crossed your vaccum lines or when you were putting your heater/ac box back together or you may of pinched the vents somewhat closed. Cycle through the different zones to ensure the vents are moving as your are selecting (defrost, floor, ect...) If you think the vaccum lines are correct then you may have a reassembly issue with the Heater/ac box. I had the same problem with my 2000 Dodge Ram 4x4. Use the KISS rule "keep it simple stupid" start with the vaccum lines and all your wiring to the motors, make sure everything is plugged in. Hopefully you'll find it there before going back into the box again.

Apr 28, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Engine stalls in drive after check engine light came on.


Have it sacnned for a code. it seems to be the speed sensor at the tranny.or the crankshaft position sensor. hope this helps. will you please vote ?

Dec 19, 2008 | 2007 Dodge Ram 1500 Quad Cab Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...