Question about 1994 Toyota Camry

Open Question

94 camry heater hose diagram

Don't have hoses

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: New Motor, Heater not working, Leaking Antifreeze

Your car is overheating because you did not bleed the cooling system. The hanging hose may be the overflow drain. Unbolt the coolant reservoir, and raise it as high as you can. Start the motor, and add coolant until the heater starts blowing heat. You will see air bubbles in the reservoir until all of the air is out. This is a common procedure when doing any cooling system maintenance on Celicas.

Posted on Feb 22, 2009

  • 335 Answers

SOURCE: emissions and vacum hose routing for a 94 toyota 4runner 3.0

Check this link. You will get what you need Rate me if this helps.

Posted on May 18, 2009

  • 30 Answers

SOURCE: where can i get the vacum hose diagram and the

Posted on Aug 08, 2009

  • 105 Answers

SOURCE: no heat on 2008 sienna, replace t-stat. one rad

hello, check and see if it has a valve in the heater core hoses, also take heater core hoses off from motor, their should be two, put water hose on the end of hose run water through one hose, then swap to other hose, run water throuhg it also, you are flushing heater core out see if any trash comes out either hose, check water pump, and thermostat, make sure it is opening, you can buy a bad thermostat, i have before

Posted on Feb 01, 2010

SOURCE: where can i find a vacuum hose diagram for 1996

i have provided the vacuum hose diagrams for Toyota Camry model.Can you please tell us the reasons for you searching the diagram?.We are ready and happy to help you!. Please rate my solution as helpful.2a4b72e.gif104d8cb.jpg

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Heater hose diagram. 2001 Ford Taurus

Go to TASCA Ford parts and they'll have a diagram of the hoses,probably. Also a place called Ford Parts Giant. don-ohio

Mar 13, 2017 | Ford Cars & Trucks

1 Answer

1988 Camry vacuum diagram all hoses I have one hose no connection?

Hi there, this is not a diagram for a 2.0L. Can someone provide the diagram for a 2.0L Automatic Camry model year 1988?

Sep 03, 2014 | 1988 Toyota Camry

1 Answer

Heater hose diagram

its in the FSM.
and at

there are 2 hose. each to heater core, and to engine fittings
you buy a car with no hoses?

Dec 30, 2013 | 1998 Toyota Camry

1 Answer

My heater hoses have been removed and bypassed. I need a heater hose diagram for my 1998 chrysler town and country van with a 3.8 L. I don't know which hose will plug into which heater core tube

That's easy

Drive around back of a dealer,walk in the open
service bay doors & ask a tech to come out &
tell you.

I walk into dealers all the time, anywhere I want to go,
& never get stopped

If your questioned your just looking for the parts dept & leave

Feb 01, 2013 | Cars & Trucks

1 Answer

My air condition is not working can I cut the hose

You have a high pressure and a low pressure hose in the air-conditioning system. Cutting these hoses can be dangerous and can release ozone destroying gasses into the atmosphere. Do not attempt to cut these hoses if you don't know what you are doing, or if you don't have the equipment to handle refrigerant gasses.

Oct 30, 2012 | 1993 Ford Taurus

1 Answer

Power Steering Reservoir Hose Leak

In a word, You don't.
If you have a breakers yard near you you might be able to rob one from a scrapper(wreck)
The metal and rubber pipes are replacement only which leaves 2 options
Get a buddy to the wreckers yard
Pop down to the dealer but don't expect them to have a slow moving part like this on the shelf.
Sorry about the Brit terminology.

Aug 17, 2012 | Cars & Trucks

1 Answer

Heater gives warm air then cool air

That's usually a dirty,clogged heater radiator. How's your antifreeze look? If it's dirty,flush the system out.
But to get your heater working........look down on the firewall and you'll see a coupla' heater hoses entering thru that go to your heater radiator. The trick is to flush backwards from the usual flow direstion that trapped the debris in there.
The flow goes from the hose near the thermostat area into the heater radiator and comes out the other hose and returns to the water pump.
Take these hoses loose from the thermostat area and from the water pump,when the car's engine has cooled.
Now take a regular garden hose with a pistol grip nozzle(just the old cheap type) and hold it tightly to the water pump heater hose and force water back thru the heater radiator.VERY IMPORTANT! DON"T get any water in the alternator and don't let any get into the dipstick of the oil or transmission while you flush!!!
Make sure the hose is directed downward where the debris will come out. (you can tie a large white sock onto the end of the hose and you'll see the debris that you flushed out when you turn it inside out)
Now you have an option to funnel some radiator flush down into the heater radiator and let it sit for an hour,and then reflush the heater the same way and then reconnect the hoses.Enjoy! don-ohio (:^)

Dec 11, 2011 | 2000 Mercury Grand Marquis

1 Answer

98 ply breeze heater blows cold air, replcd water pump, radiator, thermostat, filled w/coolant, no leaks inside car, both h/c hoses are warm, bled coolant system, fans work. Would the heater core be...

Yep! Take the heater hoses loose from the engine(one at water pupm\\mp and other one at thermostat housing area usually). Then take your water hose at your house,with a common old pistol grip nozzle,and spray water back thru the heater hose you took off the water pump side and that will force it back thru the heater core and out the hose you took off the thermostat side.
If you want to see the junk that flies out of it,tie a white rag or old tee shirt onto the end of the hose.You'll be amazed what flies out of there.Reconnect your heater hoses and see how it does.
I always fill the hose full of water so when I reconnect them,they don't have any airlock problem. don-ohio (:^)

Nov 07, 2011 | 1998 Plymouth Breeze

1 Answer

1998 lincoln town car when i turn the temp to 90 it still wont get hot have changed the thermostat, and flushed heater core but it still won't get hot the AC works great just don't have no heater...

Just a stab at it................see if there's a vacuum or electric operated valve in the heater hose lines.Trace it out.The heater hose goes from the thermostat area at intake manifold thru the heater core,and back to water pump area. don-ohio

Nov 01, 2011 | 1998 Lincoln Town Car

Not finding what you are looking for?
1994 Toyota Camry Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides