Question about 2008 Chevrolet TrailBlazer LT

Open Question

2008 Diagnostic Code C0455

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Service stability acknowledge light is on after replacing rack and pinion

Go under and make sure you connected all the connections on the rack and make sure no pins are pushed out of the connectors and they are fully latched, replace any with broken connector shell lock tabs.

Jun 21, 2017 | Cars & Trucks

1 Answer

Have a 2004 gmc yukon getting codes c0040, c0550,c0455,c0296 in the abs computer. Trac and abs light on as well as suspension control.

C0040 - Right Front Wheel Speed Circuit Malfunction
C0550 - ECU Malfunction - internal write / checksum malfunction
C0455 - Either:
  • A bent terminal or poor connection at the SWPS may be one possible cause; or
  • The vehicle stability enhancement system (VSES) electronic brake control module (EBCM) calibration may be the other possible cause.
C0296 - Transfer Case Delivered Torque for Stability Control System Circuit

Feb 27, 2015 | 2004 GMC Yukon

1 Answer

2008 HHR chk engine light on? diagnosis said link error.

Not heard of a link error code! What was the check engine code number?

Dec 31, 2014 | 2008 Chevrolet Hhr

1 Answer

What does the code u0155 mean on 2008 mazda3?

DTC Number U0155 Diagnostic Trouble Code Lost Communication With Instrument Panel Cluster (IPC) Control Module

Nov 28, 2014 | 2008 Mazda 3

1 Answer

Gm codes co455

If you are referring to a trouble code, you may have a loose or improperly affixed gas cap.

Jul 08, 2014 | 2009 Chevrolet Silverado 1500

1 Answer

What is code D0131 on a 2006 Chevrolet Trailblazer LS?

Don't know where you came up with this one D0131 , No such code . Now if you mean a P0131 it's for a O2 sensor
DTC P0131 HO2S Circuit Low Voltage Sensor 1
Front Steering Position Sensor Circuit

The electronic brake control module (EBCM) receives multiple direct inputs from the steering wheel position sensor. These circuits include, two digital square wave input signals A and B. Phase A or B should toggle high and low every 2 degrees of steering wheel rotation. . The EBCM also receives one analog steering wheel position input on the steering wheel position sensor signal 1 circuit, and is compared to the digital circuits for fault detection. The analog portion of the steering wheel position sensor is supplied a 5-volt reference and low side return circuits from the EBCM. Ignition voltage and ground circuits are supplied directly to the digital portion of the steering wheel position sensor.

Sep 30, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer


The code description is Front Steering Position Circuit. Your traction system has detected a fault in the steering controls system. Try driving on a straight line. Did you notice a pulling on one side? You will need to check tire pressures, proper tires, and brake system conditions. Is your steering wheel off center? Your vehicle may need wheel alignment. These are the least you can fix by yourself without a scan tool. With a scan tool, the recommendation could say a faulty sensor or module, or a wiring concern. My tip for you, the most common culprit is the steering angle sensor.

Okay, sir? goodluck and drive safely. : )

Oct 26, 2010 | 2008 Chevrolet Trailblazer

1 Answer

2006 envoy code co455 what is this

This diagnostic procedure supports the following DTC:
DTC C0455 Front Steering Position Sensor Circuit

Oct 27, 2009 | 2006 GMC Envoy

Not finding what you are looking for?
2008 Chevrolet TrailBlazer LT Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80407 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides