Question about 2009 Chevrolet Malibu LTZ

Open Question

2009 chevy malibu third brake light in rear window not working but backup, turn signals and brake lights work. what do I do to fix it?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: brake light on 2001 chevy blazer LT 2wd

When my blazer did this they had to replace part of the wiring harness in the steering wheel. It took forever for them to get the parts because we live in nowhereville, but once it was in it works again and no problems. I had to take it to the actual chevy dealer because none of the other places had a clue. good luck.

Posted on Jul 31, 2008

Ad
emissionwiz
  • 76109 Answers

SOURCE: 2001 Chevy Lumina brake lights not working

test and replace the brake light switch, it is located at the top of the arm the brake pedal is attached to.

Posted on Mar 26, 2009

  • 1632 Answers

SOURCE: 2004 chevy 1500 brake lights not working

check fuse under hood, batery terminals coroded wire at harness if everything fails run a hot wire to rear brake line with an interuptor.
check the swich under the foot brake.
vitally

Posted on Sep 09, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 114 Answers

SOURCE: my 97 chevy blazer, the brake lights dont work but

More likely it is the hazard/turnsignal/highbeam/cruise control switch module. It costs about $275 for the module. However there is a repair kit for the likely culprit...the hazard button. Try jiggling it around a little, see if that helps. Spray a little WD-40 into it so it can jostle back into it's correct position. You could try a junkyard unit or Ebay. It's not too hard to change. The hard part is doing it without removing the steering wheel. It can be done. I've done it. But hopefully you can locate the repair kit which costs about 15 dollars. Good luck.

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair not working rear lights 1997 gmc jimmy


brake lights not working - 1997 GMC Jimmy - RepairPal

repairpal.com > Questions > GMC > Jimmy > 1997 GMC Jimmy
Jan 11, 2011 - hi about 2 days ago i realized my brake lights were not working but my turn signal lights were working and parking lights as well but no brake ...

Tail Lights don't work but third brake light does, not fuses ...

answers.edmunds.com > Edmunds Answers
Sep 23, 2009 - 97 GMC Jimmy 4x4 blinkers work, reverse lights work, above window ... I just lost hazard lights and rear brake lights, they were working 2 days ... If it is a frayed wire or solder point, then you can repair it, but not any worn contacts. ... Does anyone have any suggestions on 1997 Honda Accord tail & brake lig.

Nov 19, 2015 | GMC Cars & Trucks

2 Answers

Brake lights are not working but my back window brake light works and so do my tail lights and turn signals. 01 chevy malibu


if rear window stop light works has blown globes in other 2 tail and stop are different circuts fit 2 new globes only go in 1 way

Sep 16, 2013 | 2001 Chevrolet Malibu

1 Answer

2009 chevy equinox lift rear brake light not working


Sound's like its just a bulb problem, just make sure that you replace it with the correct bulb,,,

Oct 05, 2012 | 2009 Chevrolet Chevrolet Equinox LT

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Rear brake lights, rear turn signals inoperable. bulbs replaced and are working, simply not responding to brake or turn signal?


If the third brake light always works, then it is the turn signal switch. If the third brake light does not work, it is probably something else. The turn signal switch is in the steering column. You have to remove the airbag and steering wheel, take out all of the componets and replace the turn signal switch. Special tools are required and a moderate level of mechanical ability. Watch the airbag, it can go off and cause serious injury!!

Sep 24, 2010 | 2004 Chevrolet Malibu

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

3 Answers

Just bought second hand 98 chevy lumina and someone stopped me saying I have no brake lights, so I checked and I only see a place for backup lights and turn signal lights. Why do I not have any break...


The brake light in the rear window and the main brake lights are on a different circuit. After the signal leaves the activating switch on the brake pedal arm, it splits. One circuit goes straight to the high mount brake light, the other goes into the turn signal switch. If the rear turn signals work but the brake lights don't, suspect the turn signal switch, not the bulbs and wires. Better to check this before removing and checking bulbs, wires and fuses. It is a common problem with the W-body cars like Lumina, Monte Carlo, Buick Regal, Olds Cutlass and Pontiac Grand Prix. (Approx 94-99 models). Part number is GM 190005031 (w/o radio accessory control) or 19005032 (with radio controls)

Nov 21, 2009 | 1998 Chevrolet Lumina

2 Answers

Brake lights not working on my chevy malibu


Check fuse/relay and then check the brake switch under the dash close to the brake pedal. It tells the brake lights to come on when you apply the brakes.

May 01, 2009 | 2000 Chevrolet Malibu

Not finding what you are looking for?
2009 Chevrolet Malibu LTZ Logo

Related Topics:

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...