Question about 1995 Chevrolet Camaro

1 Answer

95 camaro no spark on cylinder 6

I have a 95 chevy camaro 3.4 liter v6, I replaced wires,plugs,ignition coils,ignition module,it does not have a distributer they are ignition coils. On cylinder six wire i replace it with several old wires still no spark. Every other wire has spark i tested them with a wire tester. I drove it around today but it was puttering real bad. Then started making loud pop noise coming from throttle body. Does anyone have any ideas?

Posted by on

  • jamie suver Jan 24, 2009

    I think that the unburnt fuel is from the cylinder six not getting spark

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Loud popping in the intake means that the unburnt gas exploding in intake.... Check cranks sensor and gear. Gear may dirty or even damage or BAD crank sensor the sensor provides reference for spark signal. So this may be your problem. Contact if you need more help. Thanks for using FIX YA

Posted on Jan 24, 2009

  • O Mclean Jan 24, 2009

    correct, thats why I made that suggestion

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

Where can I find the spark plug wiring diagram for 1994 Camaro, v6 3.4 liter?


Engine Coil Pack
5 6 / #4 / / #3 / / #5 /
3 4 / #1 / / #6 / / #2 /
1 2
Front Ignition Wires on Coils
#1 #4 #6 #3 #2 #5
' ' ' ' ' '
O O O O O O

Firing Order: 1-2-3-4-5-6

Feb 24, 2015 | 1994 Chevrolet Camaro

1 Answer

Just replaced plugs and wires on a 95 chevy camaro v6 now has no power


Sounds like you may crossed up some plug wires? use the diagram below to check this out as the poss problem. Match the numbers on the coil pack to the cylinder numbers. Cross wiring plug wires is the most common thing that home mechs do that they get wrong.


2_16_2012_4_57_59_pm.gif

Feb 16, 2012 | 1995 Chevrolet Camaro

1 Answer

Need to know firing order for the spark plug wiring going to the ignition coil i think i might a wire or two mixed up on a 1996 chevy camaro v6 stick shift


the firing order is 1-6-5-4-3-2 driver side is odd(1-3-5)from front to back and passenger is 2-4-6 also front to back i hope this helps graphic.aspx?mod=reptiff&module_id=1&session_id=%7ba61ea1cb-726f-45d0-ba33-a9bffd6dc083%7d&image_guid=00029252&print_bw=0&

Jan 30, 2011 | Chevrolet Camaro Cars & Trucks

1 Answer

GM 3.8 liter supercharge v6 firing order 2000 pontiac grand prix spark plug wire order


For the 2000 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.8L (including Super Charger) V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
'...1....3....5...'
____________
'...2....4....6...'
.......(front)
Ignition Coil Connections:
.'.5..2.'..'.3..6.'..'.4..1.'


For the 3.8L V6 including the Super Charger:
Firing Order:
1-6-5-4-3-2
Cylinders:
.....(back).......
'...2....4....6...'
____________
'...1....3....5...'
......(front)
Ignition Coil Connections:
(back)
o 6
o ---3
___
o 2
o ---5
___
o 4
o ---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!

Oct 08, 2010 | 2000 Pontiac Grand Prix

3 Answers

Trying to find a firing order diagram for a 91 ford aerostar 4.0L V6. I have a book for it, but it is impossible to put the plug wires on the coil block in the order they describe, wires are too short! ...


For the 4.0L V6:
Firing Order:

1-4-2-5-3-6
Cylinders:
........(back)........
|...3...|.......|...6...|
|...2...|.......|...5...|
|...1...|.......|...4...|
.........(front)
Ignition Coil Connections:
..(back)
1...2...3
5...6...4

Aug 08, 2010 | 1991 Ford Aerostar Extended

2 Answers

I am not getting any fire to my plugs


check high voltage wires for cracks,chafing or melting, also replace the plug. try turning the engine over with a known good plug connected but not installed in the cylinder to confirm no spark. if there is spark but you still have a missfire, then you have a dead cylinder. if no spark, its the coil or coil module. replace plugs and wires 1st. its cheap compaired to sensors and modules

May 28, 2010 | 1998 Chevrolet Camaro

1 Answer

I need to know the timing sequence for a 1998 Mercury Mystique 2 liter


ignition timing or valve timing?

ignition timing not setable.

info:
The ignition system consists of an ignition coil, spark plug wires and spark plugs.
The crankshaft position sensor signal is the basis for ignition timing calculations. The alternating voltage signal from the crankshaft position sensor is digitized by the powertrain control module. This digitized signal is then used to position the closing time of the primary circuit of the ignition coil.
Ignition angle is determined by the powertrain control module in response to engine operating conditions. Once ignition angle has been determined, the powertrain control module interrupts the current to the primary circuit of the ignition coil thus triggering the ignition spark which is supplied to the cylinders through the spark plug wires and spark plugs.
The ignition coils are triggered by the powertrain control module in pairs (cylinders 1 and 4 and cylinders 3 and 2) sending one ignition spark to the firing cylinder and one ignition spark to the corresponding cylinder on the exhaust stroke. This make sures that any unburnt fuel residues remaining in the cylinder on the exhaust stroke are re - ignited to provide cleaner exhaust emissions.
-----------------------------------------------------

May 06, 2009 | Mercury Mystique Cars & Trucks

1 Answer

1995 Camaro backfire


check your vaccum lines and injectors I had the same problem the injector would put gas in the cylinder but not keep constant spray so it would puddle and ignite creating a back fire also check your coils and make sure you are getting spark to every plug ...

hope that help I have the same car 1995 chevrolet camaro 3.4 liter v6 automatic

Apr 30, 2009 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

599 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...