Question about Cars & Trucks
Hi Most ign barrels You need to put the key in barrel turn to position 1 & pull out barrel But looking at your vid looks like the barrel has been damaged Does your key still fit in the barrell?
Posted on Jan 15, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I couldn't find any diagram on the internet for you, but you can call your local auto part stores for a Haynes Manual for your vehicle, or you can go to this link, I found a repair manual for you on ebay
I hope all works out.
Posted on Feb 22, 2009
I am not 100% sure on toyota but most ignition switches you must remove the housing around the steering wheel to get to it . Its usually a large plastic componet on the left side behind the turn signal handle . It is always best to go to the local auto parts store and buy a haynes repair manual before attempting any repairs. Hope evereything turns out well for you !!
Posted on Dec 09, 2008
it is better to buy a new ignition barrel.it takes a special socket to get the screws out, once the screws are out they do not need to be replaced.buy new barrel,disconnect negative battery cable,disconnect wires from barrel assembly, remove barrel from colum. first take vin# to dealership parts department to get correct barrel assembly, the keys with new assembly will fit doors and trunk
Posted on May 20, 2009
SOURCE: mercedez 190 ignition barrel. I have taken out ignition barrel attached to steering coloum but i can not remove key ignition from steering coloum how does it remove ignition barrel from steering
Should be the same as w123 model. Check diy Mercedes web page.
Photos included easy to do.
Posted on Jul 07, 2009
Remove the plastic covers around the ignition switch, insert the key in the ignition and turn the key to ignition on position (just before start position) now locate the pin on the side of the ignition switch which is flush with the aluminium housing holding the barrel,the pin is about 3 mm in diameter.Gently press the pin inwards (which is spring loaded) with a sharp pointed object e.g small screwdriver and at the same time while holding the pin, pull on the ignition key as if you want to remove the key, and the barrel will slide out completely.
Posted on Sep 18, 2009
Tips for a great answer:
Jul 02, 2014 | 1971 Toyota Landcruiser
Dec 16, 2013 | 1996 Toyota 4Runner
May 10, 2012 | 2005 Toyota LandCruiser 3.0
Jun 12, 2010 | 1986 Toyota Corolla 2 Door
Nov 16, 2009 | 2000 Toyota Land Cruiser
Sep 17, 2009 | 1998 Toyota Celica
Jul 27, 2009 | 1989 Toyota Camry
Dec 27, 2008 | 2006 Toyota Land Cruiser
Dec 08, 2008 | 1997 Toyota Land Cruiser
1,008 people viewed this question
Usually answered in minutes!