Question about 1996 Dodge Caravan
Dome lights can be off or on all the time with button, but can not adjust so dome light goes on when car door is opened. Keyless entry stopped working at the same time. Any help would be aappreciated.
Sounds like you may have popped a fuse
check the iod fuses in the fuse compartment driver side of the dash. fuses should be listed on the back of that little plastic cover good luck
Posted on Jan 28, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 17, 2015 | 2001 Dodge Ram 2500 Truck
The liftgate lamps
The courtesy lamp supply voltage circuit of the body control module (BCM) supplies battery positive voltage to the dome lamp, the liftgate lamps, and the map lamps. When any door is opened, the door jamb switch contacts close providing a door open input to the BCM. The BCM then provides a ground to the interior lamps with the switch in the AUTO position. The interior lamps receive a ground at G401 with the switch in the ON position.
Important: If the liftgate is opened after all the modules go to sleep, the dome light will not come on. The liftgate ajar switch input to the BCM will not wake up the BCM once it has gone to sleep, so the dome light will not come on. Once the BCM gets an input to wake it up, from remote keyless entry (RKE) or a door handle, the dome light will turn on when the liftgate is opened.
If the driver inadvertently leaves any interior lamp ON, the BCM will turn it OFF after a 20 minute time-out.
The courtesy lamps will turn OFF immediately if the ignition switch is turned to the ON position or approximately 20 seconds after all doors are closed.
The courtesy lamps are controlled by the body control module (BCM). Inputs from the dome lamp switch and the door ajar switches are monitored by the BCM. When a door ajar switch is closed, or the dome lamp switch is turned to the ON position, the BCM supplies the B+ for the courtesy lamps.
With out a factory Tech2 scan tool or equivalent an knowing how these systems work ,you best bet is to take your vehicle to the dealer or some other ASE certified repair shop !
Sep 04, 2015 | 2009 Buick Enclave
Aug 09, 2015 | 2002 Oldsmobile Bravada
Aug 02, 2015 | 1999 Chevrolet Silverado 1500
Apr 17, 2013 | 2002 Oldsmobile Bravada
Nov 12, 2009 | 2001 Toyota Sequoia
Nov 26, 2008 | 2000 Ford Escort
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: