Question about Cars & Trucks

Open Question

My glp15af Yale fork lift wont go into foward or reverse as the park brake light stays on when park lever is released

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bunnydawg
  • 5158 Answers

SOURCE: Auto gear lever gets stuck in Park

Brian... i would respectfully advise you that the other site that bocon has given you is a scam.

I'm not sure if you are driving in winter conditons.... but first replace the interlock relay and see if that corrects the problem... and it should. it is indeed the interlock solenoid that will need to be replaced.

Robert

Please rate this solution

Posted on Jan 24, 2009

Ad
  • 116 Answers

SOURCE: Dash board parking brake and ABS lights stay

you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Posted on Apr 13, 2009

  • 718 Answers

SOURCE: Parkling Brake Console Light Stays On

Parking Brake Console Light Stays On The light is on because the brake fluid is low. The sensor in the brake fluid reservoir is signaling low fluid. This may be because leaking or the brake pads/shoes are worn down, so check to see if they needs replacement. In the mean time you can add brake fluid.

The Parking brake switch is activated by the brake handle. If you use a flashlight you may be able to see it next to the handle.

Posted on May 31, 2009

matney68
  • 426 Answers

SOURCE: park brake light wont turn off

there is a switch at the top of the actual lever .This would be what I would look at.

Posted on Aug 28, 2009

  • 13 Answers

SOURCE: the parking brake release lever

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????18

Posted on Jul 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace shift indicator light 2009 focus


pull your emergency brake up, Detach the park brake lever boot from the park brake lever,
Lift upward on the rear of the floor console finish panel to release the
floor console finish panel clips ,disconnect the electrical connector, Slide the park brake lever boot and the floor console finish panel over the park
brake lever, there you will be able to remove bulb by twisting socket,

Nov 05, 2013 | Ford Focus Cars & Trucks

1 Answer

Hummer H3 airbag light wont go off


Airbag light on in a Hummer H3 Dashboard???Here is the fix...
Start the engine of your car, set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brakepedal to its fully-applied position with your left foot. Now while you are still holding the regular brake pedal down. Quickly release the parking brake, Pull the bottom edge of the lever, located above the parking brake pedal, with the parking brake
symbol, directly rearward to release the parking brake. Make sure pedal snaps hard all the way back releasing the parking brake... If this doesn't work the first try, try it 3-5 times and it shall work... The airbag light will go off...


NOTE: The parking brake pedal is located to the left of the regular brake pedal, near the driver's door.
&

The parking brake lever is located above the parking brake pedal, with the parking brake symbol.

May 28, 2012 | 2006 Hummer H3

1 Answer

Parking brake light won't go off after releasing brake lever


Park brake lights normally operate by a small plunger type switch the turns off when the level or pedal is placed in the off position. Over time the spring in the lever weakens and placing the lever in the off position no longer depresses the switch. The switch can sometimes be adjusted to make better contact, or the switch bracket can be bent so the lever and switch make proper contact.

Feb 17, 2012 | 1992 Toyota Pickup

1 Answer

Brake light stays on after releasing parking brake pedal feels a little soft


Check the parking brake cable to make sure it is moving freely and allowing the brakes to completely release when you pull the release lever. Sometimes dirt and rust will lock the cable. In this case, the parking brake pedal will still sit on the switch even though it is unlocked because the spring can't pull it and the cable back to the off position.

May 19, 2011 | GMC Jimmy Cars & Trucks

1 Answer

Park brake light wont turn off


there is a switch at the top of the actual lever .This would be what I would look at.

Aug 28, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

The parking brake on my Volvo XC90 does not release when pulling on the release lever, can I release it manually so that I can drive it to the shop for repair?


Not from up top inside the car if it's frozen.

Sounds like it's been engaged quiet tight. So start the vehicle try depressing the release button and lifting up firmly instead of trying to immediately push downward on it to release.

Do that while lightly easing the vehicle in reverse if parked downhill to take pressure of the brake or in drive if parked uphill.

2005 is relatively new and I don't presume the cable has frozen nor snapped in the engaged position.

It's common when the brake has been engaged on a steep incline and drifted forward or the wheels curbed quiet snugly to avert rolling.

Aug 04, 2009 | 2005 Volvo XC90

1 Answer

I have a 96 cadillac seville sls. I cannot figure out how to release the parking brake. HELP !!!


Hi.The sls has a automatic release that is suposed io release the e brake w/ the car is put into reverse (however) the vacume valve (by the e brake pedal assy) fails or the vac line comes off, the brake will stay applied.there is a small lever on the e brake pedal mechinism that will release the brake,if you look under the dash by the pedal assy good luck RAY.

Jun 21, 2009 | 1993 Toyota Camry V6

1 Answer

1999 accord; no brake lights and wont shift to reverse.


Check the switch and relays. They are connected to the brake lever. When the brake is depressed the switch will turn on the brake light. Another relay will release the transmission lever to allow it to be moved from PARK to other gears(safety feature). You probably should hear a clicking when you press the brakes.

Apr 11, 2009 | 1999 Honda Accord

2 Answers

Gear shift lever wont go into park; there's no problem with transmission or fluid vehicle works fine but i cannot get the shift lever to go into park, also i can remove the key while its in the reverse...


I have a Dodge Charger 06 model and the gear wont move from Park to reverse. everything else works as far as gas, brake light, etc but my gear wont shift can i get soem help

Nov 05, 2008 | 1996 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...