Question about Cars & Trucks

Open Question

The 4 rockers on the exhaust are broken how does this happen it's on a 2E toyota motor

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 101 Answers

SOURCE: tappet problem

the check prosidure requires you engine be cold engine at top dead center at #1 cylinder and cams timing markes aligned to markes. check only intake and exaust lifters with lobes in the released position. intake is .15-.25mm and exaust is .25-.35 mm. rotate the engine 180deg. to check the remaining cylinders. if exsesive play is exsperianced. You must remove cam shafts, and add a new shim to remove the clearence. this includes the timing chain.most engine machine shops have these shims.really suggest you go online for a sevice manule. you can ruin this engine if not performed properly. This is a zero clearence engine! (no clearence between valves and pistons.) any more questions i can help you with just send to my e mail.

Posted on Dec 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove the sump of a 2e


FWD right
have to lift the motor and support it
front exhaust back to the cat has to come off
center brace removed
should be able to reach the sump bolts from there
note
the 2e motor doesnt take a gasket,just sealer, the toyota sealer is the best,
index-vws30pmlcdi4r45d3vuqhe4u-2-0.jpg

rr-vws30pmlcdi4r45d3vuqhe4u-2-1.jpg

Feb 17, 2017 | Cars & Trucks

1 Answer

How many intake valves does a toyota tazz 2e engine 2004 model have


earlier 2Es have one inlet one exhaust
after the east west front wheel drive were introduced
most 2E toyota engines have three valves per cyl
two inlets and one exhaust

if you need the correct information on your 2004 2e engine
,,,,undo the rocker cover

e397a648-22cf-4373-b847-0ca46d719837.jpg

Jun 28, 2016 | Toyota Cars & Trucks

1 Answer

Where is the exhaust gas recirculation valve located on a 2e engine.


Hi. The exhaust gas recirculation valve is located by the transmission fluid dipstick. This is yellow and is labelled as 'TRANS FLUID'

25833687-pycbwig5ssmyoz3mzopav5pv-2-0.jpg

Aug 23, 2015 | 1996 Toyota Corolla

1 Answer

Timing marks (on cam) for 2e 12valve 1300 conquest engine


go to www.automecanico.com and translate the web. This site has powerful information update complete for most models cars.
Try it and fix it.
God bless you

Jul 14, 2012 | Cars & Trucks

2 Answers

My toyota 2e 12 valves engine newly overhauled but white smoke is too much in exhaust pipe and the engine oil has rans out


Head gasket leak, white smoke is antifreeze leaking into combustion chamber, do not run it will ruin engine! replace head gasket and check heads for warp

Jun 08, 2012 | 1998 Toyota Corolla

1 Answer

I have a tundra 06 an it does a cliking sound .it comes from the motor. i check everything around the motor and nothing is loose i wonder if there is something loose inside.


The problem is probably a loose rocker arm or a broken rod. You can easily access the rocker arms by taking top cover off the engine. It should be 6 or 8 bolts and looks like an upside down bread loaf pan. There will be a little bit of oil (assuming the engine is off) but it shouldn't be too messy. There will be a number of rockers which are levers with springs on one side. One bolt should hold down each rocker, just make sure that none of them are loose. Since it is a "V" engine (V6 or V8) there will be two of these covers, half of the rockers under each one.

If all of the rockers are tight (don't crank them down excessively just check to see if one is very loose). then it might be a broken rod. To remove the rod you need to remove the rocker arms one at a time and pull out the rod with a special tool that you can probably get from your local parts store. When you find it they can also sell you a replacement rod.

If you want to narrow it down you can turn the engine on with one sides cover off (but hold a paper towel over the rockers or you will get sprayed with oil) and listen to see if you can hear which one is broken.

Jun 09, 2011 | Toyota Tundra Cars & Trucks

1 Answer

Shaking motor


T he valves in the head .you will have to take rocker cover off and reset valve clearances.If you havnt done this before a mechanic is your best bet or some body you trust who knows what to do as getting it wrong is not an option.Sorry didnt answer sooner ,just woken up.To check put engine at TDCentre,take rocker cover off and use feeler gauge and insert between the top off the valve stem and the rocker that pushes on top of the valve.As a rough guide you should be able to insert a 10,000 gauge between the inlet valve/rocker and 12,000 between the exhaust valve and rocker Easier to do this with all the plugs out,makes it easier to turn engine over by hand.

Nov 21, 2008 | 1994 Toyota Pickup

2 Answers

1993 TOYOTA TERCEL 1500cc Valve Seals Replaced now smokes much worse


You either have had the wrong valve seals installed, they are physically missing, or the valves are incorrect (too loose in the guides/stem too thin). The rocker arm seals will not contribute to your issue. If it did not have the oil smoke before you took the head off, the issue is with whatever the machine shop did. Valve seals have to fit TIGHT, or oil will go down the valve stem into the intake.
Take the head back to the machine shop & tell them to fix it. For free.

Aug 23, 2008 | 1993 Toyota Tercel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...