Question about 2003 Nissan Sentra

1 Answer

No paint on timing chain on 1.8L - 2003 Nissan Sentra

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 14,378 Answers

Click here to see.

Posted on Jan 17, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust valves on a 2006 3.5L V6 Toyota Avalon?


There is a Toyota Technical Service Bulletin issued for this:-
T-SB-0291-08 September 11, 2008 2GR-FE Valve Timing

Procedure Service Category Engine/Hybrid System Section Engine Mechanical Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 - 2009 Avalon 2007 - 2009 Camry VDS(s): BK46K 2008 - 2009 Highlander 2006 - 2009 RAV4 Engine(s): 2GR VDS(s): BK31V, BK32V, BK33V, BK34V, ZK31V, ZK32V, ZK33V, ZK34V, ZK35V 2007 - 2009 Sienna Introduction This service bulletin provides information regarding valve timing inspection and service guidelines for vehicles equipped with 2GR-FE engines. © 2008 Toyota Motor Sales, USA Page 1 of 5 T-SB-0291-08 September 11, 2008 Page 2 of 5 2GR-FE Valve Timing Procedure Introduction (Continued) Figure 1. 3 2 1 5 9 8 7 6 4 1 RH Bank Intake Camshaft Timing Gear 2 RH Bank Exhaust Camshaft Timing Gear 3 RH Bank No. 2 Timing Chain 4 Crankshaft 5 Idler Gear 6 Timing Chain 7 LH Bank No. 2 Timing Chain 8 LH Bank Exhaust Camshaft Timing Gear 9 LH Bank Intake Camshaft Timing Gear Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 3 of 5 2GR-FE Valve Timing Procedure Inspection 1. Set the No. 1 cylinder to TDC/compression. A. Set the timing mark to 0 on the timing chain cover by rotating the crankshaft clockwise. B. Verify the timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH Bank (Bank 1) Small Mark Single Line LH Bank (Bank 2) Large Mark Double Line HINT When the engine is correctly timed, the timing marks will NOT perfectly align. Figure 2. Figure 3. RH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 4. RH Bank Intake Camshaft Timing Gear 2 1 1 Bearing Cap Timing Mark 2 Gear Timing Mark © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 4 of 5 2GR-FE Valve Timing Procedure Inspection (Continued) Figure 5. LH Bank Intake Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark Figure 6. LH Bank Exhaust Camshaft Timing Gear 1 2 1 Bearing Cap Timing Mark 2 Gear Timing Mark HINT If the timing marks appear vastly out of alignment, turn the crankshaft one revolution (360 ) clockwise and note the position of the timing marks. Component Removal Guidelines 1. If engine disassembly is required that involves removing the camshafts or timing gears, set the #1 cylinder to TDC compression, wipe away any oil, and mark the following items in relation to each other prior to disassembly: • Timing gears • Timing chain • Timing chain No. 2 NOTE This relationship MUST be maintained. The intake gear is timed in relation to the crankshaft via the timing chain; the exhaust gear is timed in relation to the intake gear via the No. 2 timing chain. © 2008 Toyota Motor Sales, USA T-SB-0291-08 September 11, 2008 Page 5 of 5 2GR-FE Valve Timing Procedure Component Removal Guidelines (Continued) 2. If NEW camshaft timing gears or the No. 2 timing chain are being installed, the two yellow links on the No. 2 timing chain can be used to ensure correct relationship between the intake timing gear and the exhaust timing gear. Figure 7. 1 1 Yellow Link A. Align the paint mark on the timing chain with the intake gear timing mark (to ensure the intake gear is correctly timed to the crankshaft). Figure 8. RH Bank and LH Bank 3 3 4 3 3 4 5 4 5 4 1 2 1 RH Bank 2 LH Bank 3 Yellow Link 4 Gear Timing Mark 5 Timing Chain Paint Mark B. Align the two yellow links on the No. 2 timing chain to the timing marks on

May 04, 2015 | 2006 Toyota Avalon XLS

1 Answer

How to replace a nissan almera timing chain


Hi all it is with out doubt a major blunder by Nissan to fit a Renault timing chain mechanism to the almera and other Nissan engines. I have dealt with many a customer with an engine light on hoping that a crankshaft sensor would sort the issue out, Nissan will charge in excess of 750 euro to replace the timing kit and having it replaced you might hope to get 120k from the car well I have come across engines only covering 30k buyer chain failure, beware if you are doing a chain replacement your self use (oe) parts often spurious parts don't have the paint marks on the chain to aid setting the timing ,

Oct 17, 2012 | Cars & Trucks

1 Answer

Do you have a diagram for setting the timing on a 95 nissan sentra?





  • Here are the diagrams you requested.





ironfist109_81.jpg
ironfist109_82.jpg

ironfist109_83.jpg

You want to wipe off the links of the lower timing chain next to the timing marks on the sprocket and put paint marks on the timing chain matching them with the timing marks on the idler sprocket and crankshaft sprocket.

Regards, Tony

May 17, 2011 | 1995 Nissan Sentra

1 Answer

I have a 2001 Olds Aurora with a V6 3.5 and I need the timing diagram for this. I have looked everywhere and can not find a book with it in it. Would you happen to have this??


Please let me know if you have questions, and thanks for using Fixya.


jturcotte_1505.gif

To install:

  1. Rotate the crankshaft so the No. 1 piston is at TDC and the mark on the crankshaft is at the 4 o-clock position.
  2. Rotate the balance shaft so the timing mark is at the 5 o-clock position.
    NOTE Be sure the painted links are facing the front of the engine.
  3. Install the timing chain on the sprockets.
  4. Center the mark on the left intake camshaft sprocket between the 2 painted links.
  5. Lift the chain onto the right intake camshaft sprocket. While doing this, align the marks on the balance shaft and crankshaft sprockets with the painted marks on the chain.
  6. Verify that all of the timing marks are aligned.
  7. Install the primary chain tensioner shoe. Torque the bolt to 22 ft. lbs. (30 Nm).
  8. Compress the primary chain tensioner using the following steps:
    1. Rotate the ratchet release lever counterclockwise and hold it.
    2. Press the tensioner shoe in and hold it.
    3. Release the ratchet lever and slowly release the pressure on the shoe.
    4. Insert a pin through the hole in the lever as the lever moves to the first click. The ratchet should hold the shoe in the compressed position.
      NOTE Be sure the lever on the tensioner is facing you when installed.

  9. Install or connect the following:

    Primary chain tensioner. Torque the bolts to 18 ft. lbs. (25 Nm); then remove the chain tensioner pin. 4 chain guide access plugs. Torque the plugs to 44 inch lbs. (5 Nm). Front engine lift bracket. Torque the hex head bolt to 37 ft. lbs. (50 Nm) and the internal drive bolt to 18 ft. lbs. (25 Nm). CMP sensor. Torque the bolts to 80 inch lbs. (9 Nm).
  10. Remove the camshaft holding tools.
  11. Place a small bead of RTV sealant on the 3 areas indicated in the diagram.
  12. Install or connect the following:

    Front cover with a new gasket. Torque the bolts to 124 inch lbs. (14 Nm) and the coolant drain plug to 89 inch lbs. (10 Nm). Crankshaft balancer. Torque the bolt to 37 ft. lbs. (50 Nm); then an additional 120 degree turn.
  13. Raise the engine cradle and install new bolts. Torque the bolts to 133 ft. lbs. (180 Nm).
  14. Coat the sub-frame bushings with rubber lubricant.
  15. Install or connect the following:

    Water pump with a new gasket. Torque the bolts to 124 inch lbs. (14 Nm). Belt tensioner. Torque the bolts to 37 ft. lbs. (50 Nm). Idler pulley. Torque the bolt to 37 ft. lbs. (50 Nm). Power steering pump pulley Drive belt Underhood accessory wiring junction block Washer and coolant reservoirs Battery and tray Front diagonal brace Rocker arm covers. Torque the bolts to 80 inch lbs. (9 Nm). Negative battery cable
  16. Refill the cooling system.
  17. Refill the crankcase.
  18. Start the engine and verify no leaks.
Secondary Chain
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative battery cable.
  3. Remove the rocker arm cover and install camshaft holding fixture J-42038.
  4. Remove the camshaft sprocket bolts and install the timing chain holding fixture J-42042 on the cylinder head.
  5. Remove or disconnect the following:

    Sprockets and chain Secondary timing sprocket and chain
To install:

jturcotte_428.jpg

Fig. Correct sprocket alignment for the left secondary timing chain-3.5L engine


jturcotte_429.jpg

Fig. Correct sprocket alignment for the right secondary timing chain-3.5L engine

  1. Install or connect the following:

    Secondary timing chain on the sprockets, with the drive pins at the 12 o-clock positions Sprockets and chain assembly onto the camshafts, with the chain properly aligned on the tensioner
  2. Remove the timing chain holding fixture
  3. Install the sprocket bolts. Torque the bolts to 18 ft. lbs. (25 Nm); then an additional 45 degree turn.
  4. Remove the camshaft holding fixture.
  5. Install or connect the following:

    Rocker arm cover Negative battery cable

Apr 09, 2011 | 2001 Oldsmobile Aurora

1 Answer

Valve timming did timming chain and intake valve nicking piston ? i put gold marks on chain to marks on gears.but like i said i did this thrre times and the right head ,the intake valves are just nicking...


possibly you are 180 degrees off.
the timing marks are dimples on the gears to align up.
paint will be no use at all to use and have never heard of anyone using paint .
use paint on a crack balancer for the timing mark ony

Apr 15, 2010 | 1999 Ford Taurus

1 Answer

2004 Durango 5.7 timing gear alignment


  1. If tensioner assembly is being replaced, install tensioner and mounting bolts. Torque bolts to 28 Nm (250 in. lbs.) .
  2. Retract tensioner if required. CAUTION: The camshaft pin and the slot in the cam sprocket must be clocked at 12:00. The crankshaft keyway must be clocked at 2:00. The crankshaft sprocket must be installed so that the dots and or paint marking is at 6:00.
  3. Place both camshaft sprocket and crankshaft sprocket on the bench with timing marks on exact imaginary center line through both camshaft and crankshaft bores.
CAUTION: The timing chain must be installed with the single plated link aligned with the dot and or paint marking on the camshaft sprocket. The crankshaft sprocket is aligned with the dot and or paint marking on the sprocket between two plated timing chain links.
b04dbf8.jpg

Feb 13, 2009 | 2004 Dodge Durango

2 Answers

Suzuki Sidekick Sport suspension arm


short of the dealership, go to your local salvage yard and ask them to search for you

Dec 11, 2008 | Suzuki Sidekick Cars & Trucks

1 Answer

Couldn't find the sprocket mark in my Hyundai Lantra 1999. Pls help


If you are refering to the timing belt/ chain sprokets. Make your own marks with white paint. Also before removing the belt or chain use plastic cable ties to secure any pulleys/ sprockets so they cannot move. I used this method when replacing the timing belt on a vauxhall calibra v6 24v.

Jul 26, 2008 | Hyundai Elantra Cars & Trucks

Not finding what you are looking for?
2003 Nissan Sentra Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...