Question about Cars & Trucks
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: the car won't start; lights,
Check the starter and the starter relay or fuse. A client of mines car was doing the same thing, it ended up being two issues, the starter not working anymore, and a relay that was bad. If I am not mistaken everything should be labeled in the fuse box under the hood and will tell you where the fuse/ relay is for your vehicle
Posted on Jun 12, 2011
SOURCE: ac won't get cold anymore
Has the Freon been checked with a gauge to see if there is enough Freon to allow the system to work. Low or no Freon will not allow the compressor to engage. The low pressure switch is most likely activated due to low freon, and will cause this condition.
Posted on Aug 19, 2011
It sounds like vacuum is not getting to the vent, heat and A/C controls. Find the vacuum can. It may be under the hood on one of the inner fenders. The "one-way" check valve is usually located in the line and close to the can, make sure it works properly. The valve could be the very thing that's causing the problem. Trace the lines back to the vacuum block at the intake manifold or fire-wall, and also back to where the line goes thru the fire-wall. Check the can for leaks or obvious holes. They used to be just a plain metal can, but it could be a plastic ball. Check the lines as you go, for breaks and rub-thru's. Move the controls thru all settings and listen for vent door movement. Worst case is a bad vacuum motor or air flow position selector switch, and/or a faulty Blend Door Actuator. If you have been driving around with the Temperature knob or control set at the same spot for months, move it from fully cold to fully hot several times and wait for the air temperature to change each time. This will help reset the blend door and vacuum control system. Hope this helps... Let me know what you find.
Posted on Aug 27, 2011
Testimonial: "thank you very much,,,in this day and age it's refreshing to get a straight answer.."
Tips for a great answer:
Mar 08, 2013 | 1999 Volkswagen Beetle
Nov 26, 2017 | Cars & Trucks
Nov 05, 2012 | Cars & Trucks
Sep 17, 2012 | 1990 Dodge Caravan
Jul 23, 2012 | 1998 Kia Sephia
Jul 08, 2012 | 1989 Acura Legend
Jan 28, 2012 | 1998 Ford Taurus
Aug 14, 2011 | 1994 Chevrolet S-10 Blazer
114 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: