Question about 1994 Jeep Grand Cherokee

1 Answer

I am in the middle of replacing my radio with a newer one in my 94 jeep cherokee and one of the wires touch another one and sparked and now neither of radios work when i hook them up

Posted by on

  • no_coke_peps Jan 23, 2009

    the fuse works and everything. but the radie still doesnt turn on.. nothing happens when i hook up the wires.. could it be the radio ellimination

  • no_coke_peps Jan 23, 2009

    ah.. i totally forgot bout that.. thx.. i will check that



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Check your radio fuse.. if it is ok, and the radio does turn on and you have no sound, chances are you either popped your "amp" fuse or worse, popped your factory amp.. let me know what exactly is or isn't working right now.. but make sure you check your fuses...

Posted on Jan 23, 2009

  • Keith Methot
    Keith Methot Jan 23, 2009

    illumination?? no.. but deff sounds like fuse.. could be under hood as well...



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What is the plug on top of a transmission for in a 94 jeep Grand Cherokee AWD?

Being a 94, it's probably a speed sensor. Newer ones are in the transfer case.

Apr 12, 2015 | 1994 Jeep Grand Cherokee

1 Answer


nice guess.!
the 94 can be defeated easy, unlike the newer cars.
93/95 you shave one wire and jumper it go ground.
pulling fuse is a No GO.

for newer jeeps, bulldog works
on real new, NOTHING works, all thieves foiled ! 99.999999%

Dec 26, 2014 | Jeep Cars & Trucks

1 Answer

94 jeep grand cherokee 4.0 at start when in drive stutters then cuts off restart its fine

Spark plugs worn,fouled or not gapped properly.Fault in the fuel or electrical systems.Faulty spark plug wires.Vacuum leaks at intake or hose connections.Uneven or low cylinder compression check compression.

Jun 03, 2013 | 1994 Jeep Grand Cherokee

1 Answer

The power windows and radio dont work. i switched out the relays and still nothing. its a 94 jeep grand cherokee

problem is not related. the wire harness in the drivers door [**** rarely passenger door] has one or more broken wires inside that rubber belows in between the door hinges.

Apr 27, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Jeep radio w/cd player

begin with the easy one. code is for battery disconnect.(if you had the battery disconnected while installing that will explain it) if you ground the antenna wire to the chassis does it still spark? Is it a power antenna? I'd make sure that somehow the clock and radio wiring is not reversed and that the radio is well grounded (you can add a ground from the case to the main dash rail if you need to. As with any used item, there is a possibility also that there is just something wrong with the radio, but I don't think that yet!

Feb 13, 2010 | 1994 Jeep Grand Cherokee

2 Answers

Just bought my 94 jeep cherokee & the screen in the middle consol continues me beep and flash ''rear lamp failure''

the driver information center(DIC) is telling you one or more of your rear light bulbs has failed. it could be a tail light,stop light,center high mount stop light,turn signal or license plate light. have someone in the vehicle turn the lights on and hit the brakes and turn signals so you can see which one is burned out.

Nov 06, 2009 | 1994 Jeep Grand Cherokee

1 Answer

How to check if there is spark on 94 jeep cherokee

U pull a spark plug wire off, then stick a plastic handle screwdriver into the end of the plug wire and hold it next to metal of the engine, have someone crank the engine over and you will hear and see a spark

Mar 24, 2009 | 1994 Jeep Cherokee Country

1 Answer


the problem is you dont have the battery wire on the radio hooked up to a 12v constant. it sounds like you have to take the battery wire of the radio and hook it up to a wire that stays 12v all the time even when the car is off.

Feb 21, 2009 | 1995 Jeep Grand Cherokee

1 Answer

94 jeep

Sounds like you have a wire touching metal. Make sure all the Radio wires are capped or tapped.

Dec 18, 2008 | 1994 Jeep Cherokee Country

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides