Question about 2003 Ford Taurus

1 Answer

How to change heater core 1995 explorer - 2003 Ford Taurus

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,337 Answers

Here's how to remove your heater core.Here's the core.

Posted on Jan 14, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75814 Answers

SOURCE: help instaling heater core in

The heater core can only be removed after the dash board is removed from the vehicle. To remove the dash board the steering column needs to be dropped down or better yet also removed from the car. In addition to these two items being removed, the evaporator box in the engine compartment may need to be removed to provide access to the plenum box mounting nuts. Once the plenum is exposed, the box needs to be pulled back toward the rear of the vehicle and the core is removed through the top. It may seem like a tremendous undertaking, but it's the proper way to do it. Cutting holes in the plenum box or attempting to seal the core with these "magic" additives you pour into your radiator will only create more and larger problems for you in the future. The only short cut I can recommend, is instead of draining your radiator, pull one of the hoses off the core stubs and turn it back to the other stub while you're performing the repair. This will save you some time by not having to refill the entire system and bleed the air from the engine block. The Ford repair manual states 7.1 hours for the complete job. A good mechanic who stays at the repair can do the entire jobs in about three hours. TAKE YOUR TIME AND DON'T FORCE ANY COMPONENTS OR ATTEMPT TO BEND OR PRY THEM OUT OF YOUR WAY.

Posted on Sep 20, 2008

  • 251 Answers

SOURCE: How do you get the heater core out of a 1995 Ford

You have to remove the instrument panel, discharge the a/c and then remove the heater/ A/C plenum from the firewall to access the heater core. BIG JOB for a do-it-yourselfer.

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Show me how to chang a heater core on 1995 thounder bird


Please click on the link below and get the complete guide to remove and install heater core on 1995 ford Thunderbird :----- http://technoanswers.blogspot.com/2011/03/how-to-replace-heater-core-on-1995.html ------------ This should help.Thanks.Helpmech.

Mar 13, 2011 | 1996 Ford Thunderbird LX

1 Answer

How do you get the heater core out of a 1995 Ford Explorer XLT? Thanks


You have to remove the instrument panel, discharge the a/c and then remove the heater/ A/C plenum from the firewall to access the heater core. BIG JOB for a do-it-yourselfer.

Feb 28, 2011 | 1995 Ford Explorer

1 Answer

While driving my 95 explorer i noticed the heater wasnt getting hot its luke warm and when i turn on the defroster i start to smell anti freeze and all of the windows fog up


no heat is probably low coolant or bad thermostat,although you have fog and smell ! the heating and cooling systems are closed systems the only way the windows fog is the coolant is hot and steams inside the car due to some leak inside the heater core box. as well as the smell being present. Now it is possible that a little leak has occured where the coolant supply or return line connects to the heater core and is running into the car which is running onto the core and creating steam and smell. hopefully it is a easy clamp tighten fix for you.

Jan 13, 2011 | 1995 Ford Explorer

1 Answer

My 1995 ford explorer has 281765 miles on it it runs great but it just started leaking water from somewhere the floor on the passenger side is wet and i cant find the problem


If it's green or has a sweet smell, it's anti-freeze. This is a heater hose connection or most likely the heater core itself. Check your fluid level, if it's low you have a leak. If these aren't the problem, then you have a seal leak (body) somewhere.

Jan 09, 2011 | 1995 Ford Explorer

1 Answer

Change a heater core


  1. Disconnect battery ground cable.
  2. Remove glove box attaching screws, then the glove box.
  3. Remove lower sound insulator attaching screws and nuts, then the lower sound insulator.

Heater And A/C Programmer And Actuators
  1. Remove programmer as follows:


  1. Remove programmer shield attaching screws, then the programmer shield.
  2. Disconnect threaded rod from programmer.
  3. Disconnect programmer electrical and vacuum connector, then remove programmer.


  1. Disconnect body control module electrical connector, then remove module attaching screws and module.
  2. Remove relay panel from module assembly, then the module assembly heater core cover.
  3. Disconnect heater hoses from heater core.
  4. Remove two heater core attaching screws, then the heater core.
  5. Reverse procedure to install.

Oct 29, 2009 | 1995 Cadillac DeVille

2 Answers

How to replace the heater core 1995 buick regal 3.8 or seal it


Stop leak doesn't seem to work very well on heater cores. To get the old one out, you have to take apart the dash board. Lay on your back across the seat to see where the screws are. There are also some clips. On my 93, I had to pop out the air conditioning vents to get at some screws. Take off the glove compartment. Disconnect the hoses from the heater core (in the engine compartment.) Pull out the heater core and put in a new one. It's really not that bad, but the first time you do it, you will be puzzled.

Oct 09, 2009 | 1995 Buick Century

1 Answer

I have a 1995 ford explorer eddie bower the air works but the heater does not what could be the problem


CAN BE ONLY TWO THINGS IF THE HEATER USED TO WORK,YOU CLIMATE CONTROL UNIT OR THE ACTUATOR ON THE HEATER UNIT ASSEMBLY USUALLY ON THE BOTTOM OF THE WHOLE UNIT IN THE MIDLE OF THE FRONT LOWER END OF THE CONSOLE,AND IF YOU ARENT SURE WAS WORKING BEFORE CHECK FOR JUMPED HEATER LINES UNDER THE HOOD BECAUSE WHEN THE HEATER CORE START LEAKING SOME PEOPLES DISABLE THE HEATER TO DONT GET LEAKS INSIDE THE VEHICLE BECAUSE IS EXPENSIVE THE LABOR FOR REPLACE THE HEATER CORE IN THIS MODEL(YOU HAVE TO TEAR THE WHOLE DASH BOARD AND GET IT OUT OF THE VEHICLE)

Sep 24, 2009 | 1995 Ford Explorer

2 Answers

Heater core


You really need to go get a book at autozone or free at the library. Too many instructions to give here for this job

Aug 06, 2009 | 1995 Pontiac Grand Am

1 Answer

1995 caprice classic, No warm heat


Have you checked the heater core hoses? If they are not "hot" the heater core needs to be replaced

Feb 07, 2009 | 1995 Chevrolet Caprice Classic

1 Answer

Coolant leak...


heater core under passenger side dash is your problem,needs to be replaced.

Dec 28, 2008 | 1996 Ford Explorer

Not finding what you are looking for?
2003 Ford Taurus Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...