Question about 2002 Chrysler Town & Country

1 Answer

Which fuse goes to heated seats on a 2002 Town and Country LX Chrysler Van?

My power seats work - just not the heated seat portion. Is there a specific fuse in the fuse box under the hood that will fix this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,669 Answers

You really need to look in the fuse box under the dashboard to the left of the driver's seat. There you will find, under the fuse box cover, the words next to the fuse!

Posted on Jan 14, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: How to lower four way power seat on a 2005 Chrysler town and country van

CHECK BY THE BACK OF LOWER SEAT CUSHION IF NOT GOT TO DEALER

Posted on May 23, 2012

  • 1071 Answers

SOURCE: 2000 Chrysler Town & Country - Heated Seat Wont Heat

the actuator could be bad check ground wires check for power to the fuse and the device

Posted on Aug 26, 2009

  • 369 Answers

SOURCE: I have a 1997 chrysler town and country lx my

If the cable is not broke at the hood release handle check at the grill but look closely the other end may have come off its position not allowing it to unlatch. I worked on one that it happened to.

Posted on Nov 29, 2009

  • 128 Answers

SOURCE: Chrysler town and country Memory Seats

Memory selector is on driver's door, First set driver 1 seat and mirror positions, then press and release memory "s" button. then press and release memory selector "1" button. repeat for # 2 driver substituting memory selector 2 in step 2. hope this will help you

Posted on Jan 26, 2010

Testimonial: "Thanks so much . Your advice was spot on."

jturcotte
  • 7772 Answers

SOURCE: 2001 chrysler town and country

Hi, these problems seem unrelated to me. The radio will normally display a word like "code" or "safe" when it needs a code. Check to see if your cigarette lighter works. If no, the problem may be with the accessory relay. Similarly for the blower--it has a relay in the circuit for all speeds. Try swapping these relays with other similar relays to see if the problems resolve. The relays are normally in the power distribution box by the battery. Please let me know what you discover, and we can go from there.

jturcotte_1584.gif


jturcotte_1585.gif

Posted on Apr 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does fuse keep blowing on 2012 town and country Chrysler van seats


There is a short to ground somewhere in the circuit that the fuse protects. It could be one of the motors for the seats that has shorted out, or it could be on any wire that is on that circuit. Wires can get chaffed, or bent around edges and the insulation gets worn off. Then when the exposed power wire touches metal, it causes a spark, shorting to ground like that, and blows the fuse at the same time.
You will have to kind of track that circuit down. I would start at the motors on the seats, note where all the connections are, and follow the wiring path as best you can. You might try unplugging individual parts, like the individual motors or parts of the circuit where connectors are, and then see if a new fuse still blows, you may be able to track it down that way. Wherever the problem is, there is probably quite a bit of heat associated with the shorting. When you are feeling around, keep that in mind. Keep in mind also that without a wiring diagram, you can't be certain that the power seats are the only thing on that circuit. It is possible, maybe even probable, but you would need to verify it with a wiring diagram showing the power seats circuit. good luck.

Nov 16, 2016 | 2012 Chrysler Town and Country

1 Answer

2015 CHRYSLER TOWN & COUNTRY SEAT FUSE


Vehicle under warranty!!!! Don't fool with it! Contact dealership for this repair

Dec 22, 2015 | 2015 Chrysler Town and Country

2 Answers

Why did both power seats stop working in my 2006 Chrysler van?


did you check for rat bites on the wiring or on bonnet open position?
even there is a chance for switch problem or low battery.

Apr 21, 2015 | 2006 Chrysler Town & Country

2 Answers

How to lower four way power seat on a 2005 Chrysler town and country van


CHECK BY THE BACK OF LOWER SEAT CUSHION IF NOT GOT TO DEALER

May 23, 2012 | 2005 Chrysler Town & Country

1 Answer

Can u tell me where the fuse location for the center consolt lights on a chrysler voyager


In the U.S. the Chrysler Voyager was discontinued in 2003, but in Mexico and other parts of the world continues to market in 2004, the Chrysler Voyager was integrated to the line Town and Country, so the manuals are only available in the Town and Country.

The Heated Mirrors, Lower Instrument Panel Power Outlet and Removable Floor Console, when in the front position are fused with self resetting fuses that are only serviceable by an authorized dealer. The power seats are fused by a 30 Amp circuit breaker located under the driver's seat. The PowerWindows are fused by a 25 Amp circuit breaker located under the instrument panel near the steering column. Check there and look the label in the inside cover,
just remove the black filler panel.

Additional details cpuld find in the Owners Manual. Hope this helps.

Jan 27, 2011 | 2005 Chrysler Town & Country

1 Answer

How do I remove the door panel to gain access to malfunctioning power window on drivers side on 2002 chrysler town and country van


Remove all the screws you can, I think there are 4-5. Then, there are plastic snaps all the way around the bottom. (buy new snaps before hand) Pull from the bottom, it will feel like you are breaking it, but its just the snaps. Disconnect the power window wires, mem seat wires, and the metal bar for the door latch. Be careful not to damage the wiring!

Dec 22, 2009 | 2002 Chrysler Town & Country

1 Answer

The drivers heated front seat, does not work?


Check under the seat to ensure the plug has not be dislodged from its socket, check fuses in fuse box, if this fails it will either be a relay, switch or the actual seat element. Hope this helps

Nov 19, 2009 | 2002 Chrysler Town & Country

2 Answers

Right power seat will not lower


You need a new seat track. The motor is binding, and needs to be replaced.

Jun 10, 2009 | 2002 Chrysler Town & Country

1 Answer

2000 Chrysler Town & Country - Heated Seat Wont Heat


the actuator could be bad check ground wires check for power to the fuse and the device

Apr 02, 2009 | 2000 Chrysler Town & Country

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...