Question about Cars & Trucks

Open Question

Hyundai 2005 getz headlight adjustment - Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: how to adjust headlight of Honda 2005

open the hood by the lights u will see a hole wth a light symbl near it put a long screwdriver in and turn the click wheel thing that will raise/lower the whole headlight assembly. ADJUST THE LOW BEAMS BECAUSE THE WHOLE ASSEMBLY MOVES HIGHBEAMS ARE NOT AS IMPORTANT

Posted on Aug 07, 2008

  • 840 Answers

SOURCE: Adjusting the low beam headlight

its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Posted on Jan 31, 2009

  • 1986 Answers

SOURCE: Can't find headlight adjustment screws

They nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.


Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 17, 2009

Testimonial: "The adjustment screw (for passenger side) is located between the battery & frame's second hole. Turning counter-clockwise, it adjusts downwards,Thanks"

ghost45
  • 1280 Answers

SOURCE: driver's side headlight in a 2005 hyundai sonata

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Posted on Nov 04, 2009

  • 1757 Answers

SOURCE: timing belt diagram for 2005 1300 hyundai getz

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the 2005 Hyundai Accent Timing which have Timing Belt Diagrams very similiar to what you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/2005/make/hyundai/model/accent/2005_hyundai_accent_timing_belt_diagram_marks.htm

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i rest abs light on hyundai getz even though diagnostic testing says there are no errors


You need a diagnostic meter capable of shutting off the ABS light. Have a repair shop do it.

May 14, 2014 | 2005 Hyundai Getz 1.6

1 Answer

Getz 2005 cuts out when driving slowly


What are the fault codes. Have your fuel pressures checked (3.5 bar). Check if any wires are fouling up near the fire wall on engine harness

Mar 24, 2014 | 2005 Hyundai Accent

1 Answer

Removing front bumper on hyundai getz


unbolt it from the brackets behind the bumper

Sep 27, 2012 | 2005 Hyundai Getz 1.3

1 Answer

Headlights have stopped working, but high beam still works.


This has just happened to my 2007 1.4l Hyundai Getz did you find out the problem... Can't get in to fix till next week...

Apr 29, 2012 | 2007 Hyundai Getz 1.4

1 Answer

Hyundai 2004 Getz. Is there an adjustment within the headlight configuration so that the beam can be raised or lowered?


pop the bonnet,kneel down in front of the headlight and you will see an adjusting screw,on top and to one side of the headlight(sometimes has a spring behind it)one does up/down the other does left/right.remember if the oncomming driver is effected by too high a beam you can be fined(lots)

Jun 17, 2010 | Cars & Trucks

1 Answer

How do i change the cambelt on my 2005 1.3 getz


pick up a chilton manule it will give you detail info and all the torque specs

Jan 28, 2010 | 2005 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...