Question about 2001 Ford F350 Super Duty SuperCab

1 Answer

2011 f350 pcm problems - 2001 Ford F350 Super Duty SuperCab

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Ford Expert
  • 142 Answers

PCM is probably under the 7/70,000 EPA emission warranty and can be replaced for free if it is the PCM. If it is under 7 years, 70,000 miles and the PCM is bad, then the EPA warranty kicks in. The average dealership will try to scam out of this one, but if you stick to your guns, you can get it replaced. If they refuse, ask the question "Can you prove that this bad PCM is not causing pollution when the engine is not running correctly?". Most cannot prove it so you can get it replaced.

Posted on Feb 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I havea 97 f350 with a 7.3l powerstroke i need to know what these codes are , p-1396 p-0603


You need to change your GLOW PLUGS on Bank 2 (P1396), you can purchase them fairly inexpenive on Ebay...

P0603 (Possible PCM Problem). Diagnostic Equipment needed

Feb 13, 2014 | 1997 Ford F350 Crew Cab

1 Answer

Reprogram computer f350


you need scan tool to reprogram new PCM and keys to PCM before vechicle will start the PCM dont recognize keys.if you used factory scan tool try reprogramm keys again.

Sep 20, 2013 | Ford F-350 Cars & Trucks

1 Answer

2001 F350 v10 super duty, It won't go into second


first, i also like FORD f350, and there is the info of the DTC
P1000 - Ford Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description OBD II Monitor Testing Not Complete Conditions
Cause Key on or engine running, this code is set when a PCM Reset is performed and then one or more of the OBD II Main Monitors have not been completed It should be cleared from the PCM to pass an I/M Test for registration
or you can ask the 24 hrs live technical support obd2 multidiag actia, they will like to help you, good luck

Aug 18, 2013 | Cars & Trucks

1 Answer

Electricity is not reaching fuel pump. Wiring is fine. 1990 F350 4.9 Emgine Automatic transmission


the power relay activates the PCM, engine computer. The PCM activates the fuel pump relay that turns on the fuel pump with key ON. It runs for 5 seconds, then it shuts off, unless the engine starts. Can you hear the pump run (hum) in th fuel tank when key is turned ON?

Also, reset the inertia switch in case it tripped. Owner's manual will tell you where it is. Rest is pressing the buton.

Jul 29, 2011 | 1990 Ford F350

1 Answer

LOSS OF THROTTLE POWER AND GAUGES ON 2003 FORD F350 SUPERDUTY CODE P0603


po603 is pcm keep alive memory error. either have pcm tested or replace pcm. because the pcm is at fault.

May 06, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

1999 f350 diesel engine shut down, turns over but


that fuse powers pcm fuel heater and some other things. when the fuse blows the pcm shuts down. causing it to not run. usually its the heater that is bad. it is located at the back driver side by the fuel pump. you can unplug it and see if it starts. if so you will need to replace the heater

Jan 06, 2010 | 2002 Ford F350 Super Duty DRW Reg. Cab

2 Answers

Only one bank of injectors work


THE PROBLEM COULD BE IN THE PCM.THE PCM DRIVER CIRCUIT OR POWER CIRCUIT NOT WORKING .

Jul 31, 2009 | 1991 Ford F350

1 Answer

2002 Ford F350 Lariet


the sensor Rarely goes out but the PCM should be controlling the lights. there is supossed to be a 30 second dely between canches. (this stops a passing car from turning your headlights off.)
Get the PCM checked.

Jul 06, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

Looking for the Power Control Module, PCM, on 1996 F350 7.3L


The PCM will be to the right side of the steering column where it comes through the firewall as you look under the hood. there will be 2 wire looms, one is the back side of the fuse box and the other is the PCM.

Dec 29, 2008 | 1996 Ford F350 Crew Cab

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...