Question about Cars & Trucks

Open Question

Where is the oil sending unit on a 2002 taurus with a 3.0

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

short shadey
  • 421 Answers

SOURCE: 3.8 l v6 in taurus oil sending unit

should be under the car mounted on the oil filter sandwich plate or around there, if not look under the exhuast manifold area it will have a single wire going to it please rate -jeff

Posted on Sep 01, 2008

  • 341 Answers

SOURCE: Location of sending unit on Saab 9-3 turbo convertable

side of engine by firewall passenger side 1/2 way up bock with single wire going to it

Posted on Dec 10, 2008

gvince4
  • 31 Answers

SOURCE: WHERE IS THE OIL SENDING UNIT LOCATED ON A 93 FORD TAURUS

The oil pressure sending unit is located behind the oil filter.

Posted on Jan 31, 2009

michigan man
  • 3533 Answers

SOURCE: oil sending unit 94 taurus sho 3.2 eng

the oil sending unit is normally close to the oil filter

Posted on Feb 12, 2009

michigan man
  • 3533 Answers

SOURCE: Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?

it normally is located near the oil filter it looks like a little plug with a wire on it

Posted on Apr 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99' stratus oil pressure sending unit specifications


If the info can't be found on the internet then visit a parts house (NAPA, Advance Auto, Auto Zone, ect.) Some repair manuals have this info too. Buy one or see the library.

Mar 25, 2014 | 2002 Ford Taurus

1 Answer

I need to replace the oil sender switch on my 2002 Buick La Sabre


first need to buy oil pressure sending unit 3/8 deep socket remove oil pressure sending unit you need teflon tap sealer for oil sending unit threads.okay to replace oil pressure sending unit.you need safe raise support vechicle locate oil pressure sending unit next to the oil filter.disconnect oil pressure sending unit wire connector then use oil pressure sending unit 3/8 socket remove the sending unit.then take new oil pressure sending unit use teflon tape white plumbers tape or use thread sealer apply to the oil pressure sending unit threads then install new oil pressure sending unit and reconnect electrical connector to sending unit.then crank engine check for oil leak if all is good lower vechicle back to ground wait several minutes check engine oil level.you good to roll.

Feb 09, 2013 | 2002 Buick LeSabre

1 Answer

Oil sending unit 2001 ford taurus


On most engines it is on the driver side of the block under the master cylinder.

Jan 25, 2013 | 2001 Ford Taurus

1 Answer

Where exactly is the Oil Pressure Sending Unit on a Jeep Wrangler 2000 6cyl so i can replace?


Oil Pressure Sensor The 3 wire, solid-state engine oil pressure sensor (sending unit) is located in an engine oil pressure gallery.

Aug 07, 2010 | 2002 Jeep Wrangler

1 Answer

Replaced oil pump and main bearings but still have low oil pressure on a2001 ford taurus vin u


Replace the oil sending unit that sends the signal to the gage in the car. Located on the side of the motor.

Feb 09, 2010 | 2001 Ford Taurus

1 Answer

Oil sending unit 94 taurus sho 3.2 eng


the oil sending unit is normally close to the oil filter

Feb 09, 2009 | 1994 Ford Taurus

1 Answer

Where is the oil sending unit located on a 93 ford taurus??


The oil pressure sending unit is located behind the oil filter.

Jan 31, 2009 | 1997 Dodge Avenger

1 Answer

Oil chandes and oil light


Sounds like you may not have gotten a full amount of oil in the car, or you may have a faulty oil sending unit. Regardless of that though, you most definitely do NOT need to change your oil every month. Do another oil change and make sure the proper amount of oil is put in (the capacity is listed in your owner's manual in the specifications section). Try it out and see if you continue to have this problem. If you do, it's possible that the sensor is bad and is telling you that you have less oil than you really do.

Oct 12, 2008 | 2002 Ford Taurus

1 Answer

3.8 l v6 in taurus oil sending unit


should be under the car mounted on the oil filter sandwich plate or around there, if not look under the exhuast manifold area it will have a single wire going to it please rate -jeff

Aug 07, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...