Question about 1994 Mitsubishi Mighty Max

1 Answer

Mitsubishi idle problems

3.0 l v8 engine naual transmission 4wd. im having alot of idling problems with my truck recently one day its statred and the idle was extremely high and screaming like and ran this way the whole time driving, another day and the idle is extremely low and cuts out and back on, but will run perfectly while driving and sometimes the idle goes back to normal, while at the same time my belts are loud and have to be sprayed to quite down. anybody know what this problem could be from? ive had several suggestions in thats its a idle speed control module of some kind or something of the sort and im unfamiliar with these engines.any questions let me know

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Could be water pump

Posted on Jan 18, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
fletcherj316
  • 30 Answers

SOURCE: mitsubishi mighty max 1994 v8 idle issue

Have u checked to make sure that a vacum pipe hasent come off and the engine is taking on seconry air making it idle roughly .

Posted on Jan 12, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1993 Ford Explorer that goes into high idle when I put in gear. It does this when the engine is hot or cold.


On some cars there's a speed sensor on the clutch or transmission. That might cause an idle problem.

Mar 24, 2014 | 1993 Ford Explorer Limited

1 Answer

Mitsubishi mighty max 1994 v8 idle issue


Have u checked to make sure that a vacum pipe hasent come off and the engine is taking on seconry air making it idle roughly .

Jan 12, 2013 | 1994 Mitsubishi Mighty Max

1 Answer

Mitsubishi Galant 1989 GSR 2.0 litre DOHC engine have idle problem where engine idle (at operating temperature) is rough (HUNTING) and engine speed varies between 800 to 1300 revs (Fuel Inj Cleaned 4...


check for vacuum leaks ---transmission actuator and hose
vent control hoses , any where the there is vacuum control
the idle air control sensor would be a suspect so check wiring , connections and the sensor itself

May 01, 2017 | 1989 Mitsubishi Galant

2 Answers

My truck is a 1998 ford f250 4wd, 5.4l engine. I have been having some problems where at idle (like at a light) it will idle very erratic, and very low. I recently replaced my mass air flow sensor, my...


I would tell you to stop guessing and throwing parts on that you dont need. First have it scanned and see if there are any trouble codes. you need to replace the ALL the spark plugs, Use only Motorcraft or Autolite platinum spark plugs gapped properly. . Be careful as coils are a common weak item , and are about $95 each. the Idle Air Control (IAC) solenoids are common to go bad also (controls idle speed)

Aug 31, 2010 | 1998 Ford F250 SuperCab

2 Answers

1997 dodge ram idling problems


check the iac (idle/air valve) it controls the idle speed during the time the engine is started or coming to a stop. iac valve is located behind the throttle body . hope this will help you with your problem!!!!

Apr 16, 2010 | 1997 Dodge Ram 1500 Club Cab

2 Answers

My 2000 Lincoln LS V8 issues


a manifold leak ,dry-rotted vacuum lines also contribute to high rpm ....is there any visible signs of gasoline on the ground try using a piece of cardboard to see if any fluid gets on it also open the hood and check for visible leaks or missing cracked vacuum lines etc but sounds like a vacuum leak

Oct 15, 2009 | 2000 Lincoln LS

1 Answer

Toyota Corrolla 1989


The mechanic should check on the Idle and adjust the Idle .the car is vibrating because of the Idle is low and the engine can't do to move very easy .there is low fuel coming from the fuel pump going to the engine.The transmission of the car don't have a problem because of you just change the oil . But the Idle has to be adjusted until the car will not vibrate.

Sep 08, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

High idle CHevy 350 TBI


check if went from a V6 TO V8 need power two more cylinders

Jun 20, 2009 | 1992 Chevrolet K1500

1 Answer

1999 mercury Grand Marques car won't idle


it sounds like the idle control valve is sticking. it is located at the throttlebody where the air inlet is. try tapping the valve to see if the idle is ok if so the valve should be replaced

Nov 20, 2008 | 1999 Mercury Tracer

Not finding what you are looking for?
1994 Mitsubishi Mighty Max Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...