Question about 1998 Chevrolet Lumina

Open Question

How to replace the fuel pump of a 1998 chevy lumina

I need to replace the fuel pump on a 1998 Chevy lumina

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 979 Answers

SOURCE: I need a diagram for 1998 chevy tahoe fuel pump

Do you want a diagram, or do you just want to replace the pump?

Posted on Dec 17, 2008

Ad
  • 1596 Answers

SOURCE: I need to replace the fuel pump in my 1985 Chevy S10 Pickup.

EXACT PROCEDURE ! Please Rate Me Fairly for this!! Thank you And Good Luck !!


ELECTRIC PUMP

REMOVAL

  1. Before servicing the fuel pump the fuel system pressure must be relieved. See: Fuel Pressure Release
  2. Disconnect the negative battery cable.
  3. Raise the car on a hoist.
  4. Remove the fuel tank. See Fuel Tank / Service and Repair.
  5. Remove the fuel tank sending unit and pump assembly by turning the cam lock ring counterclockwise. Lift assembly from the fuel tank.
  6. Pull the fuel pump up into the attaching hose while pulling outward away from the bottom support. Take care to prevent damage to the rubber insulator and strainer during removal. After the pump assembly is clear of the bottom support, pull the pump assembly out of the rubber connector for removal. NOTE: Inspect the fuel pump attaching hose for any signs of deterioration. Also check the rubber sound insulator at the bottom of the pump. Replace damaged or deteriorated parts.
INSTALLATION
  1. Push the fuel pump assembly into the attaching hose.
  2. Position the fuel tank sending unit and pump assembly into the fuel tank. Use a new "O" ring seal. NOTE: Care should be taken not to fold over or twist the strainer when installing the sending unit as this will restrict the flow of fuel. Also, verify that the strainer does not block the full travel of the float arm.
  3. Install cam lock over the assembly and lock by turning clockwise.
  4. Reinstall fuel tank.
MECHANICAL PUMP

REMOVAL and INSTALLATION

NOTE: To ease pump installation, rotate the camshaft so the camshaft eccentric is out of the way of the fuel pump rocker arm.

  1. Disconnect fuel lines from fuel pump.
  2. Remove fuel pump mounting bolts and the fuel pump.
  3. Remove all gasket material from the pump and block gasket surfaces. Apply sealer to both sides of new gasket.
  4. Position gasket on pump flange and hold pump in position against its mounting surface. Make sure rocker arm is riding on camshaft eccentric.
  5. Press pump tight against its mounting. Install retaining screws and tighten them alternately.
  6. Connect fuel lines. Then operate engine and check for leaks.

Posted on Mar 22, 2009

sledge1863
  • 149 Answers

SOURCE: 1995 lumina cranks but will not start

Sounds like it has jumped timing, dont know which engine you have so could be chain or belt.

Posted on Mar 23, 2009

  • 162 Answers

SOURCE: 1998 chevy lumina car. DTC code p0440. I know

You will need to drop the tank if you have a strong gas odor. Rubber line between sending unit and metal pipe is leaking.

Posted on Sep 21, 2009

c17hydro
  • 2984 Answers

SOURCE: need to replace water pump on a1997 chevy lumina

3.1L And 3.4L (VIN E) Engines

  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Please see Section 1.
  6. Remove the water pump pulley bolts and remove the pulley.
  7. Remove the water pump bolts and separate the pump from the engine front cover.
To install:

b604dca.gif
Exploded view of the water pump and front cover arrangement—3.1L and 3.4L (VIN E) engines


  1. Clean all parts well. Use care when scraping gasket material from the front cover and the pump. Do not gouge aluminum parts. Clean the bolt threads well. The torque specification is low and if the bolt threads are dirty, an accurate torque is not possible and leaks are likely to develop.
  2. Using a new gasket, install the water pump to the front cover. Install the cleaned and lightly lubricated water pump bolts. Torque to 89 inch lbs. (10 Nm).
  3. Install the water pump pulley and bolts and torque to 18 ft. lbs. (25 Nm).
  4. Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the proper mix of DEX-COOL® and water. Check for leaks.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel pump fuse and relay located on a Chevy Lumina 1998


Both are in the box near the battery. The box may also be on the passenger side near the headlight.

Mar 07, 2013 | 1998 Chevrolet Lumina

1 Answer

1998 chevy lumina shuts off while idling..ex. sitting at a stop light


sounds to me like the fuel pump or the fuel filter are bad

Jul 17, 2012 | 1998 Chevrolet Lumina

1 Answer

How do you replace a fuel pump in a 1991 Chevy Lumina euro 3.1?


Had fule pump and filter replaced, 3 months later, same problem, car will not start, replaced Relay Switch, still wont work. any suggestions?

Feb 25, 2010 | 1991 Chevrolet Lumina

1 Answer

1998 chevy lumina cranks fine good spark no fuel puup power code po320 fuel pump problem circuit need help


Check the APV fuel pump relay under the hood. And check you fuse inside the car.

Dec 30, 2009 | 1998 Chevrolet Lumina

2 Answers

1993 Chevy Lumina


what about your antitheft system i have seen lots of ign key cylinders go bad and cannot read the keys resistance

Oct 09, 2009 | 1993 Chevrolet Lumina

1 Answer

Fuel Pump Bad.


remove fuel tank from vehicle and remove lock ring from tank swap fuel pump out..make sure sealing ring is installed properly

May 09, 2009 | 1992 Chevrolet Lumina

1 Answer

Car cuts off when braking and cornering


Could be a fuel pump issue. If the pump isn't putting out the required volume, the motor will starve during certain manuvers. Check your pressure. It should be atleast 40psi (I think, i don't have much gm experience). Also, there should be a spec somewhere for fuel pump volume over a given amount of time. To investigate this you'll have to jump the fuel pump relay and point the fuel lines at the motor into a container that you can measure the volume of. It may be something as simple as a partially clogged fuel filter, but usually when I've come across this it's been the pump going bad.

Apr 12, 2009 | 1998 Chevrolet Lumina

1 Answer

Fuel pump problem 97 chevy lumina


go buy a fuel pump relay costs about 15- bucks on drivers side a black box

Feb 18, 2009 | 1998 Chevrolet Lumina

2 Answers

I need a diagram for 1998 chevy tahoe fuel pump


Do you want a diagram, or do you just want to replace the pump?

Dec 08, 2008 | 1998 Chevrolet Tahoe

Not finding what you are looking for?
1998 Chevrolet Lumina Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...