Question about 1991 Peugeot 405

1 Answer

Left indicator comes on automatically after turning right.

After I have turned right at junction etc, when wheel of car is straightening up, the left indicator automatically jumps on, can you help with why this is? I have noticed that one of main beam bulbs is out, but not indicator bulb, could you this be the problem

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Maybe there is a high volts drop going through the bulb circuit if one of the main beam bulbs has broken. Try replacing the main beam bulb with a new one and see if you have the same problem.

Posted on Jan 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I UNLOCK MY STEERING WHEEL TO GET KEY TO TURN


turn wheel to right or left while turning the key. and always straighten your wheels to take pressure of the steering column when parking. leaving the wheels turned will cause this problem

Aug 07, 2014 | 2000 Jeep Grand Cherokee

1 Answer

2002 honda accord left turn signal comes on after a hard right turn


From your description, the combination light switch is malfunctioning. This could be a mechanical problem or indicative of a defective switch

Nov 01, 2012 | Cars & Trucks

1 Answer

My dashboard and rear lights don't work


Assuming this has the V6, the 15A PARK LPS fuse in the underhood fuse block feeds constant power to the auto park lamp relay. When the relay closes, 12V power passes through the 10A INST LPS fuse in the right instrument panel fuse block to the panel dimmer switch and then to the five instrument cluster lamps.

If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block, passes through the automatic lamp control (ALC) relay and the right instrument panel junction block to the tail filament of the dual stop/tail lamp and the separate tail lamp on each side. The 12 V power for the stop lamps is protected by the 20A STOPLAMPS fuse in the left I/P junction block, passes through the stoplamp switch when brakes are applied, stop filament of the dual stop/tail lamps. That leaves the turn signals and the hazard lamps. Power for the turn signals originates at the 10A TURNLAMPS fuse in the left I/P junction block and is applied to the hazard switch. Switch output goes to the turn/headlamp/wiper switch for selection of left or right turn signals. That switch output goes to the turn lamp. Power for the hazard function begins at the 10A HAZRD LPS fuse in the left I/P junction box and goes to the hazard switch. Switch output is sent to the left I/P junction box to make the turn signals flash. That's it. Post a comment if you need more information.

Sep 15, 2012 | 2002 Oldsmobile Alero

1 Answer

When I make a left turn my steering wheel changes is neutral position


Something is loose on your steering linkage or suspension have a pro look at it, use a shop with an alignment rack available.

Aug 22, 2012 | 1994 Toyota Camry

1 Answer

Right indicator wont turn off


You will need to replace the turn signal switch the tang that unlatches the switch when you straighten the steering wheel is broken.

Jul 26, 2012 | Renault Clio Cars & Trucks

1 Answer

Horn honks when wheel is turned


year? model? does it have an air bag in the steering wheel? most likely the horn switch is bad

Jan 01, 2012 | Buick Dawn Centercockpit Ketch Cars &...

2 Answers

Front drive noise when turning left/right


the C V JOINTS have hadit.that is the constant velocity jointsare badly worn and need replacing youdoit

Jul 27, 2009 | Hyundai Excel Cars & Trucks

1 Answer

2004 Chery Silverado: Right Front Wheel "Wobble"


There are a couple of things to check. Linkage, control arms, idler arms, inner and outer wheel bearings, warped rotors, tire misalignment etc...

anaanymous

Oct 10, 2008 | 2000 Chevrolet Silverado 1500

Not finding what you are looking for?
1991 Peugeot 405 Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...