Question about Cars & Trucks

1 Answer

My suspension light is on in my 2006 Land Rover LR3. Now what and how soon will I have to repair it? Can it run with out this repair?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

This is an easy fix on the axle of the drive wheel there is a sensor under there first check to see if the wiring is loose and if in fact it came unplugged second is if it all looks good just go ahead and replace it the sensor have been know to good bad in the first 3 to 5 yrs and then every 3 yrs after that its and easy fix good luck

Posted on Jan 14, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: Land Rover LR3 versus Jeep Grand Cherokee -- which is overall a better car??

I used to a own jeep grand cherokee but sold it for an LR3. From experience the jeep is somewhat economical over the lr3 in term mpg. Seating in the jeep is a joke, not enough leg room or head room or comfort from daily driving for 3 years. Most of the jeep dashboard is plastic which is essentially price reducing overall to the cost of the car. In terms of the LR3, you have lots of driver and passenger comfort, more suspension features, more capability, however, buttons for certain things are hard to find and need time to remember. Next, LR3's tires need to be replaced once every year, at least since i off-road 4times a month, not much but yea.

Overall the jeep is cheaper and more economical to drive with less comfort. The LR3 is the exact opposite, its more comfortable, more capable on/off road, more better looking, however, it consumes lots and lots of fuel, maintenance can be lot at 30 or 60k. let me put it this way, a jeep grand cherokee is like a bicycle and an LR3 is like a sports bike.

Posted on Jun 27, 2008

  • 333 Answers

SOURCE: How do I change Rear Breaks on 2006 LR3 Land

Brake Pads

Service Repair No - 70.40.03


Removal

  1. WARNING: Brake pads must be renewed in axle sets only, otherwise braking efficiency may be impaired. WARNING: If the brake pad wear warning light has been activated, the pad wear sensor must be replaced. CAUTION:To avoid accidental operation of the Electric Parking Brake (EPB) andpossible damage to the EPB actuator, remove Fusible link 8, located inthe engine compartment fuse box before commencing work. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.
  2. Remove the wheel and tire.
  3. CAUTION: The brake pad wear indicator sensor is easilydamaged. Do not use a lever to remove the sensor. Use fingers only. RHside only: Disconnect the brake pad wear indicator sensor.
  4. Remove the brake caliper lower bolt.
  5. Remove the brake pads.
Installation

WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.

Clean the caliper housing and anchor plate using brake cleaning fluid.
  1. Inspect the caliper piston and slide pin seals for damage.
  2. Position a bleed jar containing a small quantity of approved brake fluid. Connect the bleed tube to the bleed screw and loosen the screw.
  3. Press the piston into the caliper housing.
    • Tighten the bleed screw to 14 Nm (10 ft. lbs.) .
  1. Disconnect the bleed tube and remove the jar.
  2. Install the brake pads.
    • Install the 2 clips.
  1. Rotate the brake caliper downwards.
    • Tighten the bolt to 35 Nm (26 ft. lbs.) .
  1. Connect the brake pad wear indicator sensor.
  2. Repeat the above procedure for the other side.
  3. Install the wheels and tires.
    • Tighten the wheel nuts to 140 Nm (103 ft. lbs.) .
  1. Depress the brake pedal several times, check the fluid level in the brake fluid reservoir and top up with brake fluid if necessary.

Posted on Sep 10, 2009

  • 12 Answers

SOURCE: How to install lower control arm bushings on a

good luck

Posted on Oct 14, 2009

  • 10865 Answers

SOURCE: how to program a fob for land rover lr3 2005

This link may be of help to you

http://www.keylessride.com/keyfob.asp

Posted on Oct 18, 2009

ZJLimited
  • 17970 Answers

SOURCE: How to reset the oil service meter-2005 Land Rover LR3

Service light reset – Land Rover PDF File

I hope helps with this (remember rated this help).

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix suspension fault


And what would that fault be?

Do you not have a repair shop, you use several times
a year & ask those questions?

I would assume the shops are the only ones that know you
have any problems,so have them take care of it

May 22, 2014 | 2006 Land Rover LR3

1 Answer

Need to replace air suspension compresor lr3 2006 but the new one looks different then old one


May look a little different but has to have
the same mounting & wire connector

Dec 12, 2012 | 2004 Land Rover Range Rover

1 Answer

The engine ship came on?land rover LR3 / 2006


That little ship means you are low on coolant, check the overflow bottle for the antifreeze.

Nov 04, 2010 | 2006 Land Rover LR3

1 Answer

Change a fog light for a 2006 LR3


There is a circular cover surrounding the fog light assembly that simply pops off. Behind that cover there are three maybe four torx style screw that need to be removed, then simply just disconnect the electrical connector to the fog light assembly.

Oct 14, 2009 | 2006 Land Rover LR3

1 Answer

I am about to purchase a 2005 2006 Land Rover LR3


Well I use to have one and to tell you the truth they are very trustfull cars, parts are expensive but the only thing you should be aware is mantenance, keep it well mantain and it will give you long years of service without breakdown.

Jul 16, 2009 | 2006 Land Rover LR3

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...