Question about Cars & Trucks
Pease can you send me the torque settings for bantam 1600 rocam
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tightening sequence is (imagining the bolts looking down from the front of the car, top left to right being bolts 1,2,3,4,5 and bottom left to right being bolt 6,7,8,9,10
the tightening order is 8,3,9,2,7,4,6,5,10,1
Draw it out on paper to make it become clear. (it will I promise)
The tightening is done in stages, Stage one being to screw all the bolts in finger tight. Stage two is tightening the bolts in sequence to 20-30nm Stage three is tightening the bolts in sequence up to 40-50nm Stage four is tightening the bolts in sequence by 90-120 degrees. ---- Data checked and double checked, thats the official way to do it.
Posted on Jan 24, 2010
SOURCE: ford bantam handbrake adjustment
remove the back brake drums ,slacken handbrake cable then run a mini grinder around the lip on the edge of the drum .Then adjust the auto adjusters manully so when the drum is push on it just goes on ,tap with a hammer all around the drum to level the shoes and if need be adjust up a bit more ,then when finished re-adjust the cable so you have three notches on handbrake lever
Posted on May 31, 2010
Sometimes when the batery of vehicle goes flat or when u fit a new car batery to the bantams they love to give that problems like gauges not working rpm not working speedo not working and cluster display is dead, u disconect the batery termanils and for example fit positive termanil and arc. Or short til that blue spark occur then u swop around negative on and arc positive,leave the ignition switched on arc til gauges move!! Don't ask me why but that happend to me! A autoelek friend of mine showed me this! NB don't tri this with vehicles with a lot of elektric featers it can cause demage to ecu (engine control unit)
Posted on Oct 16, 2012
Tips for a great answer:
Sep 02, 2016 | Ford Bantam Cars & Trucks
Jun 22, 2016 | 2008 Ford Bantam 1.6i
May 12, 2016 | 2007 Ford Bantam 1.3i
Jun 26, 2015 | Ford Cars & Trucks
Jan 25, 2015 | Ford Cars & Trucks
Jul 23, 2013 | Ford Cars & Trucks
530 people viewed this question
Usually answered in minutes!