- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your hoses could be frozen if its cold where you are. Check the hoses for cracks. You might find fluid in your engine compartment if you have a broken hose. Listen to hear if the motor is pumping. There should be some sound either a click or a whiz sound when you push the washer button. If you hear no sound then check the wires on the pump. If they look good you probably need to replace the pump.
If it is cold in your area, the fluid may have frozen in the lines and or tank. Be sure you use fluid suitable for the weather conditions. If the tank is frozen - the heat from the engine may thaw it but the lines going to your wind shield may be exposed too much to the exterior to thaw from engine heat and will have to be cleared by an external heat source. A hair dryer may work - be careful of painted surfaces if you do use a heat gun or hair dryer. Hope this helps. Let me know. Thanks
Pull resivior and see if it gelled up around screen for pump motor.Cheaper washer solvents tend to do this,If so you can clean screen and it should be ok.Note sometimes you can look down in liquid with flashlight and see gell in resivior.