Question about 2007 GMC Acadia SLE
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The Throttle Actuator Control (TAC) / throttle body type trouble codes, may be caused by a loose wiring crimp at the throttle body connector, or a broken throttle body circuit.Inspect all related throttle body terminals for a loose wiring crimp. The loose crimp may be difficult to find, and the poor connection will be between the terminal and the copper strands of the wire. Wiggle test the individual throttle body circuits to see if the concern can be duplicated.
Inspect the related circuits for broken wires inside the insulation. The outer wire insulation may look fine, but the internal copper strands may be partially broken. Breaks in the wires usually occur within 1 to 4 inches of the throttle body connector. Wiggle testing may also induce a trouble code to set.
On C/K trucks complete SI procedures for voltage drop on grounds G103 and G104. Grounds G103 or G104 may be loose or corroded. If a terminal crimp or a broken wire has been found, repair or replace only the circuits involved. There is a throttle body pigtail connector available through GMSPO, post back with what you find.
Posted on Dec 15, 2009
Tips for a great answer:
Feb 03, 2015 | 2002 GMC Envoy
Aug 28, 2014 | Cars & Trucks
Mar 31, 2013 | 2008 GMC Acadia
Mar 02, 2011 | 2009 GMC Acadia
Apr 17, 2017 | 2003 GMC Yukon Denali
Feb 19, 2010 | 2008 GMC Acadia
Jan 23, 2010 | 2008 GMC Acadia
446 people viewed this question
Usually answered in minutes!