Question about 1996 Suzuki Vitara

Open Question

Leaks in the distributor of Vitara G16B

Leak in the distributor of my suzuki vitara.

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Brian032472
  • 150 Answers

SOURCE: 96 suzuki vitara - radiator empties but no visible leak

Check the passanger side floor board for moisture this could indicate a bad heater core. Then I would check the engine oil and make sure its not milky looking (head gasket). make sure when you fill it let it run with the cap open with you looking into the cap to be sure is circulating and not vapor locked (air pocket)
hope this helps

Posted on Feb 01, 2009

Ad
  • 701 Answers

SOURCE: what are the tappet settings

Hello r murray: My name is Roger and I will help you. The correct adjustment for the 1.6 DOHC engine is as follows. Engine cold intake valve setting is (0.13-0.17mm) exhaust valve setting is (.23-0.27mm). Engine warmed up the valve settings are intake valves (0.17-0.21mm) exhaust valve settings are (0.28-0.32mm). Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Posted on Apr 06, 2011

  • 457 Answers

SOURCE: suzuki vitara g16b distributor check up 7 pins

if power going to distributor but not out either module or coil is bad. test wires to coil if no power module bad if power coil ck as engine is being turned over

Posted on Aug 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and install timing chain on a 1999 1.6 4 cylinder Suzuki Vitara ?


no less than? G16B engines 1992 to max. (usa)
the suzuki FSM covers this, buy one.?
  1. Alldata.com to, log in and read. (google that, it's a #1 site)
  2. or at suzuki pit stop plus. https://suzukipitstopplus.com/Products/1037-1999-vitara-grand-vitara-service-manual.aspx
  3. $4 to look there.
  4. if you buy the Gates belt? and read the sheet in the box !
  5. or here. FREE.
  6. http://www.fixkick.com/t-belt/16-fast-belt-install.html
if , M/T tranny ,no special tools are needed.

watch out for false cam marks, seen in #6
Suzuki uses parts off another engine, and even fails to warn
you in the FSM , sad that.

FSM= the offical, factory service manual.. all cars have this.

Sep 07, 2014 | 1999 Suzuki Vitara

2 Answers

2002 suzuki grand vitara coolant lose with no visual leak replaced water pump thermostat and radiator cap


could be head gasket leaking if there are no obvious leaks from hoses,gaskets,radiator etc

May 10, 2014 | 2000 Suzuki Grand Vitara

1 Answer

Hi could some one tell me how to change the fuel pump and fuel filter on my 1991 Suzuki vitara it's the g16b engine need to fix ASAP thanks


Most cars today have the pump in the fuel tank so it will need to be droped to get the fuel pump in and out.As far as the filter if it has one in the tank it may not have another one. If it does you will find it when under the car doing the pump.Some are located on the fram rail.

Feb 16, 2013 | Cars & Trucks

1 Answer

Suzuki vitara g16b distributor check up 7 pins


if power going to distributor but not out either module or coil is bad. test wires to coil if no power module bad if power coil ck as engine is being turned over

Aug 05, 2012 | 1997 Suzuki Vitara

1 Answer

O rings on the distiributor cap connection to the engine body...oil leaks from there...is there such a standard size for the O rings or maybe the part number for this engine part of my suzuki vitara 200...


the actual part number at a dealer is #09280-56004 or what I would do is go and purchase a -035 o-ring from any store, the same thing. BUT make sure to make a mark where to line the distributor back up for the timing isn't off. Hope this helps

Jan 19, 2011 | 2000 Suzuki Vitara

1 Answer

Whats the clearance of suzuki vitara engine tune-up: ___intake/ exhaust____?


VITARA G16A 88-94 Inlet (mm)0.13 - 0.17 Exhaust (mm)0.16 - 0.20

VITARA G16B 91-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

VITARA J20A 97-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

VITARA H20A - H25A N/A

Dec 08, 2010 | Suzuki Vitara Cars & Trucks

1 Answer

96 suzuki vitara - radiator empties but no visible leak


Check the passanger side floor board for moisture this could indicate a bad heater core. Then I would check the engine oil and make sure its not milky looking (head gasket). make sure when you fill it let it run with the cap open with you looking into the cap to be sure is circulating and not vapor locked (air pocket)
hope this helps

Feb 01, 2009 | 1999 Suzuki Vitara

Not finding what you are looking for?
1996 Suzuki Vitara Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...