Question about 2007 Mitsubishi Galant Ralliart

Open Question

Radio communication error - 2007 Mitsubishi Galant Ralliart

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the hdm module on 2006 monte carlo ltz


HDM module ??????? No such module .
DTC U0100 00: Lost Communication With Engine/Powertrain Control Module (ECM/PCM)
DTC U0101 00: Lost Communication With Transmission Control Module (TCM)
DTC U0121 00: Lost Communication With Electronic Brake Control Module (EBCM)
DTC U0140 00: Lost Communication With Body Control Module (BCM)
DTC U0151 00: Lost Communication With Restraints Control Module
DTC U0155 00: Lost Communication With Instrument Panel Cluster (IPC) Control Module
DTC U0164 00: Lost Communication With HVAC Control Module
DTC U0168 00: Lost Communication With Vehicle Theft Deterrent (VTD) Control Module
DTC U0170 00: Lost Communication With Passenger Presence System (PPS)
DTC U0184 00: Lost Communication With Radio
DTC U0186 00: Lost Communication With Audio Amplifier
DTC U0194 00: Lost Communication With Digital Radio Receiver (DRR)
DTC U0198 00: Lost Communication With Communication Interface Module (OnStarĀ®)
DTC U0209 00: Lost Communication With Heated Seat Module (HSM)
DTC U0214 00: Lost Communication With Remote Function Actuation (RFA)

These are all the modules onyour vehicle - no hdm module .

Oct 13, 2017 | Cars & Trucks

1 Answer

Audio communication error on nw pajero 2013


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Sep 05, 2016 | Mitsubishi Pajero Cars & Trucks

1 Answer

What does it mean when cal error displays on the front of the radio in a 2003 chevy silverado z71?


It could be a communication error or an internal problem. Takes a scanner to see.

May 14, 2016 | Cars & Trucks

1 Answer

NO BUS displayed in odometer display as well as warning lights are on. No radio,no heat & grinding tranny sounds when shifting out of drive to park. Whats wrong with my car?


A display showing NO BUS is a communication error between one or modules. All your symptoms may be related. You can try disconnecting the battery for 30 seconds to see if all resets. If not, a diagnostic from a scan tool may be required to isolate which module is not communicating and repair from there

Nov 15, 2015 | 2000 Chrysler Cirrus

1 Answer

2000 Buick Century. Put in a replacement radio/cd/casset player. Radio works, clock works, but CD and casset do not. The message comes up E 13. What does this e code mean?


if its a radio shack radio, it means E13 means "Tape Communication Error". It is caused by the
microprocessor reading speed pulses from the tape deck either too fast, most other makes mean about the same thing, normally a stuck tape will cause this code to show up, either that or the drive gear that loads and unloads the tape is broken, cracked, or jammed

Sep 26, 2011 | 2000 Buick Century

1 Answer

I got a code from auto zone that is i believe UO 101 AND UO105 OR UA101 AND UA105 WHAT do these codes stand for


These codes are communications code errors:

The UO101 is a transmission communication error: poor communication to your transmission ECM / computer

The UO105 is a fuel injection communication error: Poor communication to your fuel injector ECM/ computer.

Jun 15, 2011 | 2006 Dodge Stratus

1 Answer

DTC v0184 2007 Ram 3500 Cummins Nobody can tell what it is. lol


no listing for a VO184
how about a UO184





U0184-LOST COMMUNICATION WITH RADIO

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition on.

- Set Condition:

If the A/C Heater Control loses communication with the Radio.

Refer to Communications.
var classElements = new Array(); var node = document; var tag = 'a'; var els = node.getElementsByTagName(tag); var elsLen = els.length; var pattern = new RegExp("(^'\\s)specs_note(\\s'$)"); for (i = 0, j = 0; i

May 27, 2011 | Dodge Ram 3500 Cars & Trucks

1 Answer

My stereo says error 12 my ford cd6000 says error 12 when i try to play a cd.... I have changed the battery also, so it has been reset since this....


error code 12 is "communications error" Ford manual says replace radio. You may remove the radio open it and check for bulging capacitors, go directly to manufacturer webpage for a replacement capacitor.

Jan 30, 2011 | 2001 Ford Focus

1 Answer

I got a 2004 impala Afternarket radio problem


Did you use the correct harness adapter for the aftermarket radio? The factory radio systems use Class 2 serial data communications between the body computer module and the radio. The class 2 communications is what "wakes up" the radio.

Check out www.scosche.com and see if your vehicle might also require an interface module.

Oct 24, 2009 | Chevrolet Impala Cars & Trucks

Not finding what you are looking for?
2007 Mitsubishi Galant Ralliart Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...