Question about 2006 Toyota RunX 160i
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: brake problems!
I would recommend that you jack up the front end, and, with the hubs unlocked, turn the front wheels by hand. If either is stiff/hard to turn, you probably have the beginnings of a caliper issue, it may be sticking, rusted, or some issue like that. If one caliper IS stuck, I would def suggest replacing both at the same time, if one is bad, the other cannot be far behind.
Posted on Sep 30, 2008
SOURCE: 2004 Toyota Camry Brakes
Raise the vehicle up and remove the rims & tires
Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.
Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)
Tap the brake rotors off of the hubs, hit them from the back side of the rotor.
No big mysteries here, this is a very easy job.
Posted on Oct 21, 2008
Please DO NOT drive in with the vehicle in this condition!!!!
What you have going on is that the brake caliper (part that holds your brake pads) is bad and sticking. Just remove it, get a NEW one from any chain autoparts store,and replace it. You will have to get a new set of pads as well,as due to the binding, the ones on there now are trashed.
Again,PLEASE do NOT drive in this condition as yours and your fellow drivers ,as well as your passengers safety is at stake.
Posted on May 01, 2010
Tips for a great answer:
Aug 08, 2017 | Toyota Cars & Trucks
Mar 10, 2015 | Toyota Cars & Trucks
Aug 09, 2013 | 1994 Mitsubishi 3000GT
Mar 07, 2011 | 2004 Toyota Corolla
Jul 25, 2010 | 2002 Toyota Corolla
May 01, 2010 | 1996 Toyota Corolla
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: